**requires sewing skills
*takes about 10 minutes to do ;)

What you need::
-tailor’s chalk or other fabric marking tool
-Heat’N Bond ultrahold iron-on adhesive (5/8″)
-standard sewing supplies (thread, scissors, machine, etc.)


O1. Fold your sweater in half through the center front, making sure the collar, sleeves, and hem are all lined up and straight. Lay a rotary ruler on top of the sweater and run the tailor’s chalk along the fold to mark the center. Open it up and make sure it looks centered.

O2. Cut all the way up through the front of the sweater only.

O3. Open up the sweater and smooth out the cut edges – they will curl a bit.

O4. Following the HeatnBond instructions, press the iron-on tape right up next to the cut edge on the wrong side of the sweater. Do on both left and right front pieces of the now cardigan.

O5. Peel the paper backing off, turn the edge back on itself so it’s wrong sides together with the adhesive in between and press to create the finished center edge.

O6. Sewing with the unfinished edge on top, stitch the two layers together. (I used the 5/8″ line on my sewing machine.) DON’T STITCH up through the collar part with your machine, tack it down by hand or there will be a very visible and ugly line there.

O7. [optional] Feel free to sew on buttons to make it look like a real cardigan!

-Andrea ;)

-how to transform a shirt into a cardigan
-peter pan collar nails
-nautical nails
-weight loss basics

**any requests???

Similar Styles

Love this look? Get more styling ideas