herman miller Eames Molded Plywood Lounge Chair
Like it to get sale alerts
  • Mater Shell Lounge Chair - Brown Saddle Leather, Soaped Oak
    shophorne.com
    The Shell Chair is developed out of Michael Dreebens ongoing interest in traditional craft practices in North India - in this case saddle making. Exquisitely made saddles have been produced in India for centuries, and although some horse culture persists, it's waning as India becomes more technologically developed. The Shell Chairs attempt to incentivize this skilled trade by providing these artisans with a new market for their craft, and hopefully encouraging them to pass it on to younger generations. The shape of the chair is an homage to Scandinavian design of the mid-twentieth century and embraces some of its core values: it's clean of line and is intended to emphasize the leather forming and stitching, it's deeply comfortable, and it's durable – like the saddles it's derived from, it's crafted from thick, top-grain leather, and with reasonable care, will last for decades. Frame: Soaped Oak. Leather: Premium brown saddle leather
  • Mater Shell Lounge Chair - Black Leather, Soaped Oak
    shophorne.com
    The Shell Chair is developed out of Michael Dreebens ongoing interest in traditional craft practices in North India - in this case saddle making. Exquisitely made saddles have been produced in India for centuries, and although some horse culture persists, it's waning as India becomes more technologically developed. The Shell Chairs attempt to incentivize this skilled trade by providing these artisans with a new market for their craft, and hopefully encouraging them to pass it on to younger generations. The shape of the chair is an homage to Scandinavian design of the mid-twentieth century and embraces some of its core values: it's clean of line and is intended to emphasize the leather forming and stitching, it's deeply comfortable, and it's durable – like the saddles it's derived from, it's crafted from thick, top-grain leather, and with reasonable care, will last for decades. Frame: Soaped Oak. Leather: Black leather.
  • Normann Copenhagen Era Lounge Chair - Low
    shophorne.com
    Classic, inviting, nostalgic and curved. That's one way of describing the new range of lounge chairs designed by the Danish designer, Simon Legald. But the Era collection is many other things too. The design is well-proportioned, the lines are sharp, and the feel is contemporary. Era combines modern production techniques with traditional furniture craftsmanship in a timeless and characterful design. With its streamlined design and high quality, Era is a durable, long-lasting and versatile collection that easily accommodates modern interior’s need for flexibility. The chair is suitable for many different rooms in the home and can easily be used for different purposes as needs change. The Era collection is designed to transcend generations and is just as at home with lovers of design or families with children, as it is with young couples or their grandparents. The Era Lounge Chair is available in both a high and low version. The legs are available in oak, walnut, black lacquered steel or chrome, as well a chrome frame for the rocking chair. A footstool is also available for the Era collection, allowing ample opportunity for comfortable relaxation and rest for the feet. Choose between two lovely wool textiles with a vivid feel and beautiful structures, or soft, durable leather in a vast number of colors. Simon Legald says: ”It took a while to get the proportions and the interaction between the soft curves and straight lines on the shells just right. It was crucial that the upholstering and stitching were carried out with the utmost precision. I wanted to create individual chairs where each one had its own character. I did this through the variations of the high and low versions, and by the different frames available for the chair. For example, the wooden frames are flat and add warmth while the slimmer, round steel and chrome frames give a more industrial feel. Finally, the frame for the rocking chair is a slightly unexpected and playful choice for a lounge chair.” Priced with Gabriel Breeze Fusion upholstery-other materials available.
  • Modernica Shell Arm Chair - Prince Charles Base
    shophorne.com
    In 2009, Peter Shire and the Modernica Studio teamed up and designed the Prince Charles Base. By combining the modern and the classic, the chair has been described as a distant cousin of Queen Anne. “Shire’s interpretation on the modern classic incorporates 300-years of furniture design into a single chair. By giving the signature shell chair a set of violin-like legs, Shire’s adds a touch of the Victorian era to the seat.” Easily one of the most important and recognizable designs of the twentieth century. The Fiberglass Shell Chairs were originally designed in 1948, as an entry in The Museum of Modern Art’s International Design Competition. At the time, no one could possibly have anticipated the massive success and longevity of this iconoclastic design. In the early fifties, fiberglass was considered an ultra-high tech material. Produced with a mixture of resin and glass fibers, it was lightweight, yet heavy-duty. Initial development and production was through Zenith Plastics—early pioneers of developing fiberglass for household and military applications. As for the chair bases, they were cleverly designed to provide a number of leg options that would be interchangeable within and between the arm shell and the side shell. The shell chairs were first available in the spring of 1950. The first runs of the chairs were produced in only three colors; griege, elephant-hide gray, and parchment—all of which had interesting translucent qualities. The chairs were distributed until 1983. In 2000, Modernica revived this potentially lost art of high-pressure, molded fiberglass. Modernica creates each shell, by hand, one-by-one, in our Los Angeles factory—just as they had been designed, developed, and produced in Southern California in the 1950s. Modernica uses all of the original presses and specialized equipment obtained from Century Plastics. To ensure authenticity of production, the initial shell chair production was overseen by Sol Fingerhut and Irv Green, the same team employed over sixty years ago to develop the original technology. Modernica creates each chair with the charge of adhering to the original tactile qualities, texture, and characteristics that alone are unique to the fiberglass shell chair. Our historic equipment has created thousands of chairs for three generations of chair lovers — and everyday Modernica continues to produce beautiful chairs for upcoming generations. Choose from a wide range of shell colors and chair base options. Modernica offers the flexibility to build a chair to suit your individual style and needs. Please note that due to the nature of fiberglass, some "hairs" may vary in darkness and color due to the singeing/burning process used to create the seat. These fibers add to the uniqueness of each chair. Handcrafted in Los Angeles, U.S.A.
  • Normann Copenhagen Era Lounge Chair - High
    shophorne.com
    Classic, inviting, nostalgic and curved. That's one way of describing the new range of lounge chairs designed by the Danish designer, Simon Legald. But the Era collection is many other things too. The design is well-proportioned, the lines are sharp, and the feel is contemporary. Era combines modern production techniques with traditional furniture craftsmanship in a timeless and characterful design. With its streamlined design and high quality, Era is a durable, long-lasting and versatile collection that easily accommodates modern interior’s need for flexibility. The chair is suitable for many different rooms in the home and can easily be used for different purposes as needs change. The Era collection is designed to transcend generations and is just as at home with lovers of design or families with children, as it is with young couples or their grandparents. The Era Lounge Chair is available in both a high and low version. The legs are available in oak, walnut, black lacquered steel or chrome, as well a chrome frame for the rocking chair. A footstool is also available for the Era collection, allowing ample opportunity for comfortable relaxation and rest for the feet. Simon Legald says: "It took a while to get the proportions and the interaction between the soft curves and straight lines on the shells just right. It was crucial that the upholstering and stitching were carried out with the utmost precision. I wanted to create individual chairs where each one had its own character. I did this through the variations of the high and low versions, and by the different frames available for the chair. For example, the wooden frames are flat and add warmth while the slimmer, round steel and chrome frames give a more industrial feel. Finally, the frame for the rocking chair is a slightly unexpected and playful choice for a lounge chair”. Priced with Gabriel Breeze Fusion Upholstery--Other materials available. Gabriel Breeze Fusion Colors:
  • Modern Homes
    Styling idea
  • Modernica Shell Side Chair - Low Rod Base
    shophorne.com
    The Case Study Fiberglass Low Rod Chair adds an understated refinement to any room. Pick your shell and choose the wire-frame in either chrome-plated steel or black powder-coated steel. Easily one of the most important and recognizable designs of the twentieth century. The Fiberglass Shell Chairs were originally designed in 1948, as an entry in The Museum of Modern Art’s International Design Competition. At the time, no one could possibly have anticipated the massive success and longevity of this iconoclastic design. In the early fifties, fiberglass was considered an ultra-high tech material. Produced with a mixture of resin and glass fibers, it was lightweight, yet heavy-duty. Initial development and production was through Zenith Plastics—early pioneers of developing fiberglass for household and military applications. As for the chair bases, they were cleverly designed to provide a number of leg options that would be interchangeable within and between the arm shell and the side shell. The shell chairs were first available in the spring of 1950. The first runs of the chairs were produced in only three colors; griege, elephant-hide gray, and parchment—all of which had interesting translucent qualities. The chairs were distributed until 1983. In 2000, Modernica revived this potentially lost art of high-pressure, molded fiberglass. Modernica creates each shell, by hand, one-by-one, in our Los Angeles factory—just as they had been designed, developed, and produced in Southern California in the 1950s. Modernica uses all of the original presses and specialized equipment obtained from Century Plastics. To ensure authenticity of production, the initial shell chair production was overseen by Sol Fingerhut and Irv Green, the same team employed over sixty years ago to develop the original technology. Modernica creates each chair with the charge of adhering to the original tactile qualities, texture, and characteristics that alone are unique to the fiberglass shell chair. Our historic equipment has created thousands of chairs for three generations of chair lovers — and everyday Modernica continues to produce beautiful chairs for upcoming generations. Choose from a wide range of shell colors and chair base options. Modernica offers the flexibility to build a chair to suit your individual style and needs. Please note that due to the nature of fiberglass, some "hairs" may vary in darkness and color due to the singeing/burning process used to create the seat. These fibers add to the uniqueness of each chair. Handcrafted in Los Angeles, U.S.A.
  • Finn Juhl Chieftains Chair
    dwr.com
    People also liked
    With distinctive shapes inspired by primitive weaponry and a seat that appears suspended above the frame, the sculptural form of the Chieftains Chair (1949) changed the future of Danish design. Finn Juhl created the chair for the 1949 Cabinetmakers’ Guild in Copenhagen. During the exhibition, King Frederick IX sat in the chair, causing a journalist to suggest calling it the “King’s Chair.” But Juhl didn’t like how pretentious that sounded and said, “You had better call it a chieftain’s chair,” which the journalist did. (At some point the apostrophe was dropped.) This original is an authentic, fully licensed product of Onecollection, House of Finn Juhl™. Made in Denmark. Finn Juhl believed that “the craftsman’s ability to form is probably the same as that of a sculptor.” The Chieftains Chair received the Danish Design Award in the Classics category for 2012.
  • BassamFellows Tuxedo Classic Club Chair
    hermanmiller.com
    Ergonomically shaped, expertly crafted, and designed with comfort in mind, the Tuxedo Classic Club Chair fits naturally into both home and business spaces, playing the role of a club chair with ease and style.
  • Skargaarden Haringe Armchair
    shophorne.com
    The Haringe series of teak furniture is refined elegance for indoors, outdoors or anything in between. The sophistication of the series makes it ideal for around the swimming pool, in the game room or just about anywhere. The teak slats are framed with either stainless steel or black stainless steel. The cushions are given a sophisticated touch through the use of buttons and decorative stitching so they are not waterproof but the beauty is still undeniable. The cushions are available in either a weather durable Sunbrella fabric or in imitation leather with loose patches sewn together by hand and buttons added along the seams. The leather cushions are for indoor use only. The series has an armchair, lounge chair, sofa, and cocktail tables in 2 sizes as well as 3 sizes of a dining table. As with all teak furniture, to maintain the original luster the teak requires to be oiled once or twice a year. If left untreated the wood will develop a silvery gray patina which is equally beautiful.
  • Marcel Breuer Wassily® Chair
    dwr.com
    People also liked
    In spirit and stature, Marcel Breuer's Wassily Chair (1925) from Knoll has few equals. Believed to be the first bent tubular steel chair design, the Wassily Chair distills the traditional club chair to a series of strong, spare lines, executed with dynamic material counterpoint. The gleaming chrome-finished tubular steel frame-inspired by the graceful, curving handlebars of the Adler bicycle-is seamless in its assemblage. Thick cowhide leather slings create the design's seating surfaces, which maintain their crisp tautness for decades. Named for Wassily Kandinsky, the father of abstract painting and a colleague of Breuer's at the Bauhaus, the Wassily Chair is a symbol of the industrial heroism and engineering invention of the early 20th century. Made in Italy. Each piece is stamped with the KnollStudio logo and the designer's signature. The Wassily Chair is a registered trademark of Knoll, Inc., manufactured by Knoll according to the original and exacting specifications of the designer.
  • Herman Miller Bolster Corner Chair (Optional Sectional Component)
    yliving.com
    Design by BassamFellows, 2014.Made in the U.S.A. by Herman Miller.The Bolster Corner Chair, designed by BassamFellows, marries plush comfort for lounging with ample support for sitting in a form quiet enough for traditional surroundings and essential enough for the most minimal, contemporary interiors. A Long, slim seat cushion is set atop minimal, steel legs to give Bolster its strong horizontal lines. These lines are made more prominent by Bolster's plush back pillows, constructed of foam and fiber for supportive comfort.The Bolster Corner Chair can be combined with other items in the Bolster Collection to create customized sofa sectionals. Available with a curated textile offering and a brushed stainless leg finish. Product Features: Bolster Sofa Group offers a Club Chair, Settee, Three-Seat Sofa, Corner and Chaise Lounge units and an Ottoman As part of a modular system, ganging hardware is attached with each custom-made piece Kiln-dried, corner blocked frame features unidirectional webbing for strength Supportive foam and fiber cushions are double zipped on the back and side to keep them in place Brushed stainless leg finish Tailored upholstery available in a wide range of textiles and colors Backed by Herman Miller's 5 Year Warranty: View Here
  • Illuminate
    Styling idea
  • Artek Domus Lounge Chair
    shophorne.com
    Ilimari Tapiovaara was committed to designing furniture for a much broader market. His goal was to produce quality inexpensive furniture that was made from materials that were readily available in 1940s Finland; one result is the Domus Chair. The chair was given clean simple lines that spoke to style and functionality. The Domus Chair is a multipurpose chair that is perfect as a standalone chair, in a grouping or around a dinner table. The frame is made of laminated birch and the seat and back take their form from presses birch plywood. The chair is available in a natural lacquered birch, black stain or honey stain or with a white lacquered frame and honey lacquered seat. The Domus Lounge Chair is also available upholstered.
  • Kate Spade Norwich Chair
    katespade.com
    People also liked
    Kate Spade New York, Because rooms should be mix-and-match affairs of hand-curated pieces acquired from travels near and far--plus pretty forever pieces, like this ivory-piped chair (a perfect place for curling up with your favorite well-worn book).
  • herman miller Eames Upholstered Molded Plastic Armchair With 4-Leg Base
    shopgrounded.com
    Designed by Charles and Ray Eames. Part of the Herman Miller Collection. The sleek lines and organic shape of this enduring chair by Charles and Ray Eames epitomize their mantra of "the best for the most for the least". The quiet, minimal 4-leg base complements the gentle curves of the molded shell, with its deep-seat pocket and waterfall edges. Dimensions: 25"w, 25.5"d, 31.5"h. Seat 17.5"h. Made in the USA by Herman Miller.
  • Modernica Shell Side Chair - Prince Charles Base
    shophorne.com
    In 2009, Peter Shire and the Modernica Studio teamed up and designed the Prince Charles Base. By combining the modern and the classic, the chair has been described as a distant cousin of Queen Anne. “Shire’s interpretation on the modern classic incorporates 300-years of furniture design into a single chair. By giving the signature shell chair a set of violin-like legs, Shire’s adds a touch of the Victorian era to the seat.” Easily one of the most important and recognizable designs of the twentieth century. The Fiberglass Shell Chairs were originally designed in 1948, as an entry in The Museum of Modern Art’s International Design Competition. At the time, no one could possibly have anticipated the massive success and longevity of this iconoclastic design. In the early fifties, fiberglass was considered an ultra-high tech material. Produced with a mixture of resin and glass fibers, it was lightweight, yet heavy-duty. Initial development and production was through Zenith Plastics—early pioneers of developing fiberglass for household and military applications. As for the chair bases, they were cleverly designed to provide a number of leg options that would be interchangeable within and between the arm shell and the side shell. The shell chairs were first available in the spring of 1950. The first runs of the chairs were produced in only three colors; griege, elephant-hide gray, and parchment—all of which had interesting translucent qualities. The chairs were distributed until 1983. In 2000, Modernica revived this potentially lost art of high-pressure, molded fiberglass. Modernica creates each shell, by hand, one-by-one, in our Los Angeles factory—just as they had been designed, developed, and produced in Southern California in the 1950s. Modernica uses all of the original presses and specialized equipment obtained from Century Plastics. To ensure authenticity of production, the initial shell chair production was overseen by Sol Fingerhut and Irv Green, the same team employed over sixty years ago to develop the original technology. Modernica creates each chair with the charge of adhering to the original tactile qualities, texture, and characteristics that alone are unique to the fiberglass shell chair. Our historic equipment has created thousands of chairs for three generations of chair lovers — and everyday Modernica continues to produce beautiful chairs for upcoming generations. Choose from a wide range of shell colors and chair base options. Modernica offers the flexibility to build a chair to suit your individual style and needs. Please note that due to the nature of fiberglass, some "hairs" may vary in darkness and color due to the singeing/burning process used to create the seat. These fibers add to the uniqueness of each chair. Handcrafted in Los Angeles, U.S.A.
  • & Tradition In Between Chair SK2 - White Oiled Oak
    houseology.com
    & Tradition SK2 Chair with green wool upholstered seat pad.. Designed by Sami Kallio.. Made form solid wood and formpressed veneer.. This elegant seating solution that will make a great addition to any dining arrangement.. Also available in other upholstery options. Please contact Customer Services to find out more.
  • herman miller Eames Upholstered Molded Plastic Armchair With Dowel Leg
    shopgrounded.com
    Designed by Charles and Ray Eames. Part of the Herman Miller Collection. Charles and Ray Eames believed that comfort was as important as looks. The molded plastic chairs have comfort built in. The shell seats have high, flexible backs, deep seat pockets, and waterfall front edges so you can sit comfortably even for extended periods. A landmark design from Charles and Ray Eames, these were the first industrially manufactured plastic chairs. Their clean, simple forms cradle the body. Today's chairs are authentic original design with updated, eco-friendly materials and manufacturing and a large selection of base frame, shell, edge, and wood dowel finishes, and fabric colors. The dowel leg chairs feature your choice of natural maple, ebonized ash or walnut wood legs with a metal base frame. Dimensions: 25"w, 25.5"d, 31.5"h. Seat 18"h. Made in the USA by Herman Miller.
  • Modernica Shell Side Chair - H-Base
    shophorne.com
    The Case Study Fiberglass H-Base Chair is a classic icon without any fuss. Pick your favorite shell for a visually solid chair that will not disappoint. Easily one of the most important and recognizable designs of the twentieth century. The Fiberglass Shell Chairs were originally designed in 1948, as an entry in The Museum of Modern Art’s International Design Competition. At the time, no one could possibly have anticipated the massive success and longevity of this iconoclastic design. In the early fifties, fiberglass was considered an ultra-high tech material. Produced with a mixture of resin and glass fibers, it was lightweight, yet heavy-duty. Initial development and production was through Zenith Plastics—early pioneers of developing fiberglass for household and military applications. As for the chair bases, they were cleverly designed to provide a number of leg options that would be interchangeable within and between the arm shell and the side shell. The shell chairs were first available in the spring of 1950. The first runs of the chairs were produced in only three colors; griege, elephant-hide gray, and parchment—all of which had interesting translucent qualities. The chairs were distributed until 1983. In 2000, Modernica revived this potentially lost art of high-pressure, molded fiberglass. Modernica creates each shell, by hand, one-by-one, in our Los Angeles factory—just as they had been designed, developed, and produced in Southern California in the 1950s. Modernica uses all of the original presses and specialized equipment obtained from Century Plastics. To ensure authenticity of production, the initial shell chair production was overseen by Sol Fingerhut and Irv Green, the same team employed over sixty years ago to develop the original technology. Modernica creates each chair with the charge of adhering to the original tactile qualities, texture, and characteristics that alone are unique to the fiberglass shell chair. Our historic equipment has created thousands of chairs for three generations of chair lovers — and everyday Modernica continues to produce beautiful chairs for upcoming generations. Choose from a wide range of shell colors and chair base options. Modernica offers the flexibility to build a chair to suit your individual style and needs. Please note that due to the nature of fiberglass, some "hairs" may vary in darkness and color due to the singeing/burning process used to create the seat. These fibers add to the uniqueness of each chair. Handcrafted in Los Angeles, U.S.A..
  • Cyan Design Ms. Jolie Chair
    blisshomeanddesign.com
    A supple, wing-like design constructed in pale maple, its mirrored curves softly overlapping and outlined in piping within the quiet flax-colored upholstery, provides the frame for the Ms. Jolie Chair. A serene and inspired transitional seating piece, this chair is constructed in light, unobtrusive neutral colors so its luxury is easily accented throughout the seasons.
  • Herman Miller Bolster Club Chair
    yliving.com
    Design by BassamFellows, 2014.Made in the U.S.A. by Herman Miller.The Bolster Club Chair, designed by BassamFellows, marries plush comfort for lounging with ample support for sitting in a form quiet enough for traditional surroundings and essential enough for the most minimal, contemporary interiors. A Long, slim seat cushion is set atop minimal, steel legs to give Bolster its strong horizontal lines. These lines are made more prominent by Bolster's plush back pillows, constructed of foam and fiber for supportive comfort. The Bolster Club Chair is available with a curated textile offering and a brushed stainless leg finish. Product Features: Bolster Sofa Group offers a Club Chair, Settee, Three-Seat Sofa, Corner and Chaise Lounge units and an Ottoman Kiln-dried, corner blocked frame features unidirectional webbing for strength Supportive foam and fiber cushions are double zipped on the back and side to keep them in place Brushed stainless leg finish Tailored upholstery available in a wide range of textiles and colors Backed by Herman Miller's 5 Year Warranty: View Here
  • grey monday
    Styling idea
  • Modernica Arm Shell Chair - Dowel Base
    shophorne.com
    The Case Study Fiberglass Dowel Chair is an essential for the modern home and with so many options—it is possible to create your own one-of-a-kind chair. The shell is available in a myriad of colors. Choose your wire-frame in either zinc-plated steel or black powder-coated steel, and finish your design by choosing either solid maple dowels or solid walnut dowels. Easily one of the most important and recognizable designs of the twentieth century. The Fiberglass Shell Chairs were originally designed in 1948, as an entry in The Museum of Modern Art’s International Design Competition. At the time, no one could possibly have anticipated the massive success and longevity of this iconoclastic design. In the early fifties, fiberglass was considered an ultra-high tech material. Produced with a mixture of resin and glass fibers, it was lightweight, yet heavy-duty. Initial development and production was through Zenith Plastics—early pioneers of developing fiberglass for household and military applications. As for the chair bases, they were cleverly designed to provide a number of leg options that would be interchangeable within and between the arm shell and the side shell. The shell chairs were first available in the spring of 1950. The first runs of the chairs were produced in only three colors; griege, elephant-hide gray, and parchment—all of which had interesting translucent qualities. The chairs were distributed until 1983. In 2000, Modernica revived this potentially lost art of high-pressure, molded fiberglass. Modernica creates each shell, by hand, one-by-one, in our Los Angeles factory—just as they had been designed, developed, and produced in Southern California in the 1950s. Modernica uses all of the original presses and specialized equipment obtained from Century Plastics. To ensure authenticity of production, the initial shell chair production was overseen by Sol Fingerhut and Irv Green, the same team employed over sixty years ago to develop the original technology. Modernica creates each chair with the charge of adhering to the original tactile qualities, texture, and characteristics that alone are unique to the fiberglass shell chair. Our historic equipment has created thousands of chairs for three generations of chair lovers — and everyday Modernica continues to produce beautiful chairs for upcoming generations. Choose from a wide range of shell colors and chair base options. Modernica offers the flexibility to build a chair to suit your individual style and needs. Please note that due to the nature of fiberglass, some "hairs" may vary in darkness and color due to the singeing/burning process used to create the seat. These fibers add to the uniqueness of each chair. Handcrafted in Los Angeles, U.S.A.
  • Illiad Chair
    zincdoor.com
    People also liked
    The Iliad chair captivates with modern panache from every angle. Across its front and back, customizable upholstery personalizes a retro wooden frame made current with contemporary curves. Available in a variety of fabric and finish options. Hand crafted in the USA using sustainable materials. Kiln-dried frames made from responsibly harvested hardwood. Water-based wood adhesive with no VOC emissions. Seat deck and trim pad made from 80% regenerated fibers. Cushion cores made from at least 10% natural plant-based ingredients. Fabric swatches are available by contacting swatches@laylagrayce.com. 26.5"W x 27"D x 35.5"H. Seat: 20"W x 19"D x 17.5"H. Arm: 24"H.
  • Herman Miller Rolled Arm&Trade; Club Chair
    yliving.com
    Design by Ward Bennett for Geiger.By Herman Miller.Inspired by the classic Chesterfield, Ward Bennett's Rolled Arm Club Chair is supremely modern with its tightly upholstered, oversized frame. Its low-slung, high-armed silhouette features mitered upholstery details in a sophisticated offering of fabrics and leathers. The lounge chair's inviting, broad seat rests atop recessed solid-wood legs in walnut or ash. Product Features: Frame in rigid molded urethane with foam inserts Seat and back are upholstered foam and can be upholstered in a variety of fabric and leather options Ships fully assembled Backed by Herman Miller's 12 Year Warranty: View Here
  • Modernica Shell Side Chair - Stacking Base
    shophorne.com
    The Case Study Fiberglass Stacking Chair is a classic and highly practical icon. As the name suggests the chairs can be easily stacked and stored when not in use. Easily one of the most important and recognizable designs of the twentieth century. The Fiberglass Shell Chairs were originally designed in 1948, as an entry in The Museum of Modern Art’s International Design Competition. At the time, no one could possibly have anticipated the massive success and longevity of this iconoclastic design. In the early fifties, fiberglass was considered an ultra-high tech material. Produced with a mixture of resin and glass fibers, it was lightweight, yet heavy-duty. Initial development and production was through Zenith Plastics—early pioneers of developing fiberglass for household and military applications. As for the chair bases, they were cleverly designed to provide a number of leg options that would be interchangeable within and between the arm shell and the side shell. The shell chairs were first available in the spring of 1950. The first runs of the chairs were produced in only three colors; griege, elephant-hide gray, and parchment—all of which had interesting translucent qualities. The chairs were distributed until 1983. In 2000, Modernica revived this potentially lost art of high-pressure, molded fiberglass. Modernica creates each shell, by hand, one-by-one, in our Los Angeles factory—just as they had been designed, developed, and produced in Southern California in the 1950s. Modernica uses all of the original presses and specialized equipment obtained from Century Plastics. To ensure authenticity of production, the initial shell chair production was overseen by Sol Fingerhut and Irv Green, the same team employed over sixty years ago to develop the original technology. Modernica creates each chair with the charge of adhering to the original tactile qualities, texture, and characteristics that alone are unique to the fiberglass shell chair. Our historic equipment has created thousands of chairs for three generations of chair lovers — and everyday Modernica continues to produce beautiful chairs for upcoming generations. Choose from a wide range of shell colors and chair base options. Modernica offers the flexibility to build a chair to suit your individual style and needs. Please note that due to the nature of fiberglass, some "hairs" may vary in darkness and color due to the singeing/burning process used to create the seat. These fibers add to the uniqueness of each chair. Handcrafted in Los Angeles, U.S.A.
  • Meloni Armchair
    homedecorators.com
    People also liked
    Featuring a plush, flared wingback frame, wedge-shaped legs and stylish upholstery, our Meloni Armchair offers transitional style at an amazingly affordable price. Twin lines of brass nailheads run along the back, sides and front of this classic accent chair. Place it in your living room or home office to create a cozy, stylish spot. Brown faux suede upholstery. Brass nailhead trim. Solid wood legs in black finish. Includes matching pillow. Complements transitional to modern home decor styles.
  • Herman Miller Eames Molded Plastic Armchair - Wire Base
    lumens.com
    "The Eames® Molded Plastic Armchair - Wire Base by Herman Miller® is at once comfortable and architectural. Its signature molded polypropylene seat has a deep ergonomic seat pocket, armrests and a smooth waterfall front. Also known as the ''Eiffel Tower,'' the welded wire base rests stably and level on four swiveling glides."

Get sale alerts on styles you love

Continue
×
About