Loll Designs Alfresco Table 62
  • Loll Designs Alfresco Round Table 44
    shophorne.com
    It seems that most things in the universe move in a circular pattern and so too should outdoor tables. The Alfresco 44 Round has a wide base that provides good leg room and a table that will not be tippy. The top has 4 separate panels and a hole in the middle for an umbrella. Constructed with a recycled HDPE top and an HDPE and Richlite frame, this Alfresco will clean-up easily and requires no maintenance.
  • Loll Designs Fresh Air Table 58
    shophorne.com
    Fresh air is as important as healthy food and good friends and when all three coalesce there is something special that occurs. We named our Fresh Air Collection after just that. The clean lines and unique joinery make this a perfect table and bench for modern outdoor spaces. The bench has angled seat slats for a comfortable sit that won't allow water to pool on top. Made with half inch thick recycled plastic, both the table and bench are easy to move around and heavy enough to stay put in a gusty wind. The Fresh Air table and bench are sized perfectly for four even when two is really all you need. Made entirely with 1-inch thick recycled plastic, this one will be around for a long time. Available in 100% recycled high density polyethylene (#2 Plastic Bottles) in Black, White, Red, Chocolate Brown, Leaf Green, Sand, Blue & Gray. Length: 58" | Height: 30.75" | Width: 30" Notes on Colors: We have tried our very best to accurately represent product colors on this website. However, due to the nature of the recycled plastic used and electronic media, color of actual products may differ slightly from how they appear on this website on your particular computer. Click here to request color samples.
  • Loll Designs Go Side Table
    dwr.com
    People also liked
    The Go Collection (2005) was created after “an absolutely informal study taken by us lollygaggers,” say designers Greg Benson and Jeff Taly, the founders of Loll Designs. “We learned that people frequently sit with other people when outside. Perhaps this is because there’s no TV, or maybe our gregarious tendencies are amplified outdoors?” The Go Collection is a modern take on classic club chairs and love seats found indoors. Its seats are similar in height to those of dining chairs, and its backs have a less dramatic angle than those of typical outdoor lounge chairs for a more upright sitting position. These pieces are made of recycled plastic reclaimed from post-consumer goods like milk jugs, which can be recycled again if necessary. Since Loll was founded in 2006, its use of recycledhas kept millions of milk jugs out of landfills. The fade-resistant, waterproof, maintenance-free Adirondack Collection is made to last for years. Each piece ships flat to save on packing; simple assembly required (Allen wrench included). Made in U.S.A.
  • Loll Designs Adirondack Table
    bobbyberkhome.com
    Our modern Adirondack Table has been redesigned with all recycled poly and hidden fasteners. The Adirondack Table is available in all nine colors and with a convenient lower shelf for extra storage, it works well with any of our outdoor lounge chairs. Product Features 100% Recycled and Recyclable Our material is recycled and recyclable high-density polyethylene (HDPE), primarily from milk jugs. Approximately 8 milk jugs are reclaimed per pound. No Maintenance / Weatherproof Leave Loll products outside year-round! Loll never needs to be painted or stained and cleans easily with a soft brush, a natural cleaner or a power wash if you like that sort of thing. Check out our maintenance video for more info. UV Information For color and UV information, please click here. Replaceable Parts If for some reason a part on you furniture becomes damaged you can easily order just that part and replace it. Put the old part in your recycling bin or send it back to us and we will recycle it for you. Stainless Steel Fasteners High-quality stainless steel fasteners and brass inserts hold all of our pieces together. Richlite This unique and environmentally-conscious paper composite is used in some Loll pieces. Made with resin-saturated paper, Richlite requires no maintenance and may patina over time. Low-Impact Manufacturing Loll was conceived as a way to repurpose excess skate ramp material. Founded on principles of efficient and responsible use/reuse of manufacturing material, Loll products are fabricated using lean manufacturing techniques. Made in the USA Loll products are designed and manufactured in Duluth, Minnesota, USA.
  • Loll Designs Cocktail Rectangle Table
    bobbyberkhome.com
    In the context of outdoor lounging, a Loll Satellite Table is a recycled poly object placed into orbit around humans resting in Loll Furniture. Unlike the moon, the Loll Satellite Tables actually rotate in conjunction with you and the Earth at just over 1,000 miles per hour. Isn't it time for you to have your very own Satellite? Perfect for star gazing on black nights with warm breezes and cold drinks, choose from a variety of shapes and sizes from circles, squares, ovals, and rectangles. All Loll Satellite Tables are made with heavy 1 inch thick 100 percent recycled plastic and are available in an assortment environmentally conscious colors. Dimenssions: 40"W x 22"D x 13"H. 100% Recycled and Recyclable Our material is recycled and recyclable high-density polyethylene (HDPE), primarily from milk jugs. Approximately 8 milk jugs are reclaimed per pound. No Maintenance / Weatherproof Leave Loll products outside year-round! Loll never needs to be painted or stained and cleans easily with a soft brush, a natural cleaner or a power wash if you like that sort of thing. Replaceable Parts If for some reason a part on you furniture becomes damaged you can easily order just that part and replace it. Put the old part in your recycling bin or send it back to us and we will recycle it for you. Stainless Steel Fasteners High-quality stainless steel fasteners and brass inserts hold all of our pieces together. Richlite This unique and environmentally-conscious paper composite is used in some Loll pieces. Made with resin-saturated paper, Richlite requires no maintenance and may patina over time. Low-Impact Manufacturing Loll was conceived as a way to repurpose excess skate ramp material. Founded on principles of efficient and responsible use/reuse of manufacturing material, Loll products are fabricated using lean manufacturing techniques. Made in the USA Loll products are designed and manufactured in Duluth, Minnesota, USA.
  • Loll Designs Satellite End Round Table 18
    bobbyberkhome.com
    In the context of outdoor lounging, a Loll Satellite accent table is a recycled polyethylene object placed into orbit around humans resting in Loll Furniture. Unlike the moon, the Loll Satellite Table actually rotates in conjunction with the Earth and her inhabitants, at just over 1,000 miles per hour, but appears to be sitting still. We think it's time for you to have your very own Satellite... perfect for star gazing on black nights with warm breezes and cold drinks. All Loll Satellite Tables are made with heavy duty 1 inch thick poly and available in an assortment of colors, shapes and sizes. Dimenssions: 18"w x 18"D x 16"H. 100% Recycled and Recyclable Our material is recycled and recyclable high-density polyethylene (HDPE), primarily from milk jugs. Approximately 8 milk jugs are reclaimed per pound. No Maintenance / Weatherproof Leave Loll products outside year-round! Loll never needs to be painted or stained and cleans easily with a soft brush, a natural cleaner or a power wash if you like that sort of thing. Replaceable Parts If for some reason a part on you furniture becomes damaged you can easily order just that part and replace it. Put the old part in your recycling bin or send it back to us and we will recycle it for you. Stainless Steel Fasteners High-quality stainless steel fasteners and brass inserts hold all of our pieces together. Richlite This unique and environmentally-conscious paper composite is used in some Loll pieces. Made with resin-saturated paper, Richlite requires no maintenance and may patina over time. Low-Impact Manufacturing Loll was conceived as a way to repurpose excess skate ramp material. Founded on principles of efficient and responsible use/reuse of manufacturing material, Loll products are fabricated using lean manufacturing techniques. Made in the USA Loll products are designed and manufactured in Duluth, Minnesota, USA.
  • Loll Designs Alfresco Round Table
    bobbyberkhome.com
    It seems that most things in the universe move in a circular pattern and so too should outdoor tables. The Alfresco 44" Round has a wide base that provides good leg room and a table that won't be tippy. The top has 4 separate panels and a hole in the middle for an umbrella. This table is designed to pair-up with the Alfresco Benches, Cricket and T77 Dining chairs, or an eclectic variety of each. Constructed with a recycled HDPE top and an HDPE and Richlite frame, this Alfresco will clean-up easily and requires no maintenance. Dimenssions: 30"H x 44"D. 100% Recycled and Recyclable Our material is recycled and recyclable high-density polyethylene (HDPE), primarily from milk jugs. Approximately 8 milk jugs are reclaimed per pound. No Maintenance / Weatherproof Leave Loll products outside year-round! Loll never needs to be painted or stained and cleans easily with a soft brush, a natural cleaner or a power wash if you like that sort of thing. Replaceable Parts If for some reason a part on you furniture becomes damaged you can easily order just that part and replace it. Put the old part in your recycling bin or send it back to us and we will recycle it for you. Stainless Steel Fasteners High-quality stainless steel fasteners and brass inserts hold all of our pieces together. Richlite This unique and environmentally-conscious paper composite is used in some Loll pieces. Made with resin-saturated paper, Richlite requires no maintenance and may patina over time. Low-Impact Manufacturing Loll was conceived as a way to repurpose excess skate ramp material. Founded on principles of efficient and responsible use/reuse of manufacturing material, Loll products are fabricated using lean manufacturing techniques. Made in the USA Loll products are designed and manufactured in Duluth, Minnesota, USA.
  • Loll Designs Satellite End Square Table 26
    bobbyberkhome.com
    In the context of outdoor lounging, a Loll Satellite Table is a recycled poly object placed into orbit around humans resting in Loll Furniture. Unlike the moon, the Loll Satellite Tables actually rotate in conjunction with you and the Earth at just over 1,000 miles per hour. Isn't it time for you to have your very own Satellite? Perfect for star gazing on black nights with warm breezes and cold drinks, choose from a variety of shapes and sizes from circles, squares, ovals, and rectangles. All Loll Satellite Tables are made with heavy 1 inch thick 100 percent recycled plastic and are available in an assortment environmentally conscious colors. Dimenssions: 26"W x 26"D x 14.75"H. 100% Recycled and Recyclable Our material is recycled and recyclable high-density polyethylene (HDPE), primarily from milk jugs. Approximately 8 milk jugs are reclaimed per pound. No Maintenance / Weatherproof Leave Loll products outside year-round! Loll never needs to be painted or stained and cleans easily with a soft brush, a natural cleaner or a power wash if you like that sort of thing. Replaceable Parts If for some reason a part on you furniture becomes damaged you can easily order just that part and replace it. Put the old part in your recycling bin or send it back to us and we will recycle it for you. Stainless Steel Fasteners High-quality stainless steel fasteners and brass inserts hold all of our pieces together. Richlite This unique and environmentally-conscious paper composite is used in some Loll pieces. Made with resin-saturated paper, Richlite requires no maintenance and may patina over time. Low-Impact Manufacturing Loll was conceived as a way to repurpose excess skate ramp material. Founded on principles of efficient and responsible use/reuse of manufacturing material, Loll products are fabricated using lean manufacturing techniques. Made in the USA Loll products are designed and manufactured in Duluth, Minnesota, USA.
  • Loll Designs Satellite End Round Table 26
    bobbyberkhome.com
    In the context of outdoor lounging, a Loll Satellite Table is a recycled poly object placed into orbit around humans resting in Loll Furniture. Unlike the moon, the Loll Satellite Tables actually rotate in conjunction with you and the Earth at just over 1,000 miles per hour. Isn't it time for you to have your very own Satellite? Perfect for star gazing on black nights with warm breezes and cold drinks, choose from a variety of shapes and sizes from circles, squares, ovals, and rectangles. All Loll Satellite Tables are made with heavy 1 inch thick 100 percent recycled plastic and are available in an assortment environmentally conscious colors. Dimenssions: 26"W x 26"D x 14.75"H. 100% Recycled and Recyclable Our material is recycled and recyclable high-density polyethylene (HDPE), primarily from milk jugs. Approximately 8 milk jugs are reclaimed per pound. No Maintenance / Weatherproof Leave Loll products outside year-round! Loll never needs to be painted or stained and cleans easily with a soft brush, a natural cleaner or a power wash if you like that sort of thing. Replaceable Parts If for some reason a part on you furniture becomes damaged you can easily order just that part and replace it. Put the old part in your recycling bin or send it back to us and we will recycle it for you. Stainless Steel Fasteners High-quality stainless steel fasteners and brass inserts hold all of our pieces together. Richlite This unique and environmentally-conscious paper composite is used in some Loll pieces. Made with resin-saturated paper, Richlite requires no maintenance and may patina over time. Low-Impact Manufacturing Loll was conceived as a way to repurpose excess skate ramp material. Founded on principles of efficient and responsible use/reuse of manufacturing material, Loll products are fabricated using lean manufacturing techniques. Made in the USA Loll products are designed and manufactured in Duluth, Minnesota, USA.
  • Loll Designs Fresh Air Table
    bobbyberkhome.com
    Fresh air is as important as healthy food and good friends and when all three coalesce there is something special that occurs. We named our Fresh Air Collection after just that. The clean lines and unique joinery make this a perfect table and bench for modern outdoor spaces. The bench has angled seat slats for a comfortable sit that won't allow water to pool on top. Made with half inch thick recycled plastic, both the table and bench are easy to move around and heavy enough to stay put in a gusty wind. The Fresh Air table and bench are sized perfectly for four even when two is really all you need. Dimenssions: 58"W x 30"D x 30.75"H. 100% Recycled and Recyclable Our material is recycled and recyclable high-density polyethylene (HDPE), primarily from milk jugs. Approximately 8 milk jugs are reclaimed per pound. No Maintenance / Weatherproof Leave Loll products outside year-round! Loll never needs to be painted or stained and cleans easily with a soft brush, a natural cleaner or a power wash if you like that sort of thing. Replaceable Parts If for some reason a part on you furniture becomes damaged you can easily order just that part and replace it. Put the old part in your recycling bin or send it back to us and we will recycle it for you. Stainless Steel Fasteners High-quality stainless steel fasteners and brass inserts hold all of our pieces together. Richlite This unique and environmentally-conscious paper composite is used in some Loll pieces. Made with resin-saturated paper, Richlite requires no maintenance and may patina over time. Low-Impact Manufacturing Loll was conceived as a way to repurpose excess skate ramp material. Founded on principles of efficient and responsible use/reuse of manufacturing material, Loll products are fabricated using lean manufacturing techniques. Made in the USA Loll products are designed and manufactured in Duluth, Minnesota, USA.
  • Loll Designs Cocktail Oval Table
    bobbyberkhome.com
    In the context of outdoor lounging, a Loll Satellite Table is a recycled poly object placed into orbit around humans resting in Loll Furniture. Unlike the moon, the Loll Satellite Tables actually rotate in conjunction with you and the Earth at just over 1,000 miles per hour. Isn't it time for you to have your very own Satellite? Perfect for star gazing on black nights with warm breezes and cold drinks, choose from a variety of shapes and sizes from circles, squares, ovals, and rectangles. All Loll Satellite Tables are made with heavy 1 inch thick 100 percent recycled plastic and are available in an assortment environmentally conscious colors. Dimenssions: 42"W x 23"D x 13"H. 100% Recycled and Recyclable Our material is recycled and recyclable high-density polyethylene (HDPE), primarily from milk jugs. Approximately 8 milk jugs are reclaimed per pound. No Maintenance / Weatherproof Leave Loll products outside year-round! Loll never needs to be painted or stained and cleans easily with a soft brush, a natural cleaner or a power wash if you like that sort of thing. Replaceable Parts If for some reason a part on you furniture becomes damaged you can easily order just that part and replace it. Put the old part in your recycling bin or send it back to us and we will recycle it for you. Stainless Steel Fasteners High-quality stainless steel fasteners and brass inserts hold all of our pieces together. Richlite This unique and environmentally-conscious paper composite is used in some Loll pieces. Made with resin-saturated paper, Richlite requires no maintenance and may patina over time. Low-Impact Manufacturing Loll was conceived as a way to repurpose excess skate ramp material. Founded on principles of efficient and responsible use/reuse of manufacturing material, Loll products are fabricated using lean manufacturing techniques. Made in the USA Loll products are designed and manufactured in Duluth, Minnesota, USA.
  • Untitled #2743
    Styling idea
  • Loll Designs Cocktail Round Table
    bobbyberkhome.com
    In the context of outdoor lounging, a Loll Satellite Table is a recycled poly object placed into orbit around humans resting in Loll Furniture. Unlike the moon, the Loll Satellite Tables actually rotate in conjunction with you and the Earth at just over 1,000 miles per hour. Isn't it time for you to have your very own Satellite? Perfect for star gazing on black nights with warm breezes and cold drinks, choose from a variety of shapes and sizes from circles, squares, ovals, and rectangles. All Loll Satellite Tables are made with heavy 1 inch thick 100 percent recycled plastic and are available in an assortment environmentally conscious colors. Dimenssions: 36"W x 36"D x 13"H. 100% Recycled and Recyclable Our material is recycled and recyclable high-density polyethylene (HDPE), primarily from milk jugs. Approximately 8 milk jugs are reclaimed per pound. No Maintenance / Weatherproof Leave Loll products outside year-round! Loll never needs to be painted or stained and cleans easily with a soft brush, a natural cleaner or a power wash if you like that sort of thing. Replaceable Parts If for some reason a part on you furniture becomes damaged you can easily order just that part and replace it. Put the old part in your recycling bin or send it back to us and we will recycle it for you. Stainless Steel Fasteners High-quality stainless steel fasteners and brass inserts hold all of our pieces together. Richlite This unique and environmentally-conscious paper composite is used in some Loll pieces. Made with resin-saturated paper, Richlite requires no maintenance and may patina over time. Low-Impact Manufacturing Loll was conceived as a way to repurpose excess skate ramp material. Founded on principles of efficient and responsible use/reuse of manufacturing material, Loll products are fabricated using lean manufacturing techniques. Made in the USA Loll products are designed and manufactured in Duluth, Minnesota, USA.
  • Loll Designs Alfresco Table 95
    bobbyberkhome.com
    The Loll Alfresco Table is the perfect setting for any outdoor meal or social gathering. Constructed with a recycled HDPE frame and top, this Alfresco will clean up easily and requires no maintenance. This table is designed to be a companion with the 22 and 47 Alfresco Benches, Cricket and T77 Dining chairs, or an eclectic variety of each. Dimenssions: 95"W x 36"D x 30"H. 100% Recycled and Recyclable Our material is recycled and recyclable high-density polyethylene (HDPE), primarily from milk jugs. Approximately 8 milk jugs are reclaimed per pound. No Maintenance / Weatherproof Leave Loll products outside year-round! Loll never needs to be painted or stained and cleans easily with a soft brush, a natural cleaner or a power wash if you like that sort of thing. Replaceable Parts If for some reason a part on you furniture becomes damaged you can easily order just that part and replace it. Put the old part in your recycling bin or send it back to us and we will recycle it for you. Stainless Steel Fasteners High-quality stainless steel fasteners and brass inserts hold all of our pieces together. Richlite This unique and environmentally-conscious paper composite is used in some Loll pieces. Made with resin-saturated paper, Richlite requires no maintenance and may patina over time. Low-Impact Manufacturing Loll was conceived as a way to repurpose excess skate ramp material. Founded on principles of efficient and responsible use/reuse of manufacturing material, Loll products are fabricated using lean manufacturing techniques. Made in the USA Loll products are designed and manufactured in Duluth, Minnesota, USA.
  • Loll Designs Satellite End Square Table 18
    bobbyberkhome.com
    In the context of outdoor lounging, a Loll Satellite Table is a recycled poly object placed into orbit around humans resting in Loll Furniture. Unlike the moon, the Loll Satellite Tables actually rotate in conjunction with you and the Earth at just over 1,000 miles per hour. Isn't it time for you to have your very own Satellite? Perfect for star gazing on black nights with warm breezes and cold drinks, choose from a variety of shapes and sizes from circles, squares, ovals, and rectangles. All Loll Satellite Tables are made with heavy 1 inch thick 100 percent recycled plastic and are available in an assortment environmentally conscious colors. Dimenssions: 18"W x 18"D x 16"H. 100% Recycled and Recyclable Our material is recycled and recyclable high-density polyethylene (HDPE), primarily from milk jugs. Approximately 8 milk jugs are reclaimed per pound. No Maintenance / Weatherproof Leave Loll products outside year-round! Loll never needs to be painted or stained and cleans easily with a soft brush, a natural cleaner or a power wash if you like that sort of thing. Replaceable Parts If for some reason a part on you furniture becomes damaged you can easily order just that part and replace it. Put the old part in your recycling bin or send it back to us and we will recycle it for you. Stainless Steel Fasteners High-quality stainless steel fasteners and brass inserts hold all of our pieces together. Richlite This unique and environmentally-conscious paper composite is used in some Loll pieces. Made with resin-saturated paper, Richlite requires no maintenance and may patina over time. Low-Impact Manufacturing Loll was conceived as a way to repurpose excess skate ramp material. Founded on principles of efficient and responsible use/reuse of manufacturing material, Loll products are fabricated using lean manufacturing techniques. Made in the USA Loll products are designed and manufactured in Duluth, Minnesota, USA.
  • Loll Designs Alfresco Table 62
    bobbyberkhome.com
    The Loll Alfresco Table is the perfect setting for any outdoor meal or social gathering. Constructed with a recycled HDPE frame and top, this Alfresco will clean up easily and requires no maintenance. This table is designed to be a companion with the 22 and 47 Alfresco Benches, Cricket and T77 Dining chairs, or an eclectic variety of each. Dimenssions: 62"W x 30"D x 30"H. 100% Recycled and Recyclable Our material is recycled and recyclable high-density polyethylene (HDPE), primarily from milk jugs. Approximately 8 milk jugs are reclaimed per pound. No Maintenance / Weatherproof Leave Loll products outside year-round! Loll never needs to be painted or stained and cleans easily with a soft brush, a natural cleaner or a power wash if you like that sort of thing. Replaceable Parts If for some reason a part on you furniture becomes damaged you can easily order just that part and replace it. Put the old part in your recycling bin or send it back to us and we will recycle it for you. Stainless Steel Fasteners High-quality stainless steel fasteners and brass inserts hold all of our pieces together. Richlite This unique and environmentally-conscious paper composite is used in some Loll pieces. Made with resin-saturated paper, Richlite requires no maintenance and may patina over time. Low-Impact Manufacturing Loll was conceived as a way to repurpose excess skate ramp material. Founded on principles of efficient and responsible use/reuse of manufacturing material, Loll products are fabricated using lean manufacturing techniques. Made in the USA Loll products are designed and manufactured in Duluth, Minnesota, USA.
  • Loll Designs Alfresco Table 72
    bobbyberkhome.com
    The Loll Alfresco Table is the perfect setting for any outdoor meal or social gathering. Constructed with a recycled HDPE frame and top, this Alfresco will clean up easily and requires no maintenance. This table is designed to be a companion with the 22 and 47 Alfresco Benches, Cricket and T77 Dining chairs, or an eclectic variety of each. Dimenssions: 72"W x 30"D x 30"H. 100% Recycled and Recyclable Our material is recycled and recyclable high-density polyethylene (HDPE), primarily from milk jugs. Approximately 8 milk jugs are reclaimed per pound. No Maintenance / Weatherproof Leave Loll products outside year-round! Loll never needs to be painted or stained and cleans easily with a soft brush, a natural cleaner or a power wash if you like that sort of thing. Replaceable Parts If for some reason a part on you furniture becomes damaged you can easily order just that part and replace it. Put the old part in your recycling bin or send it back to us and we will recycle it for you. Stainless Steel Fasteners High-quality stainless steel fasteners and brass inserts hold all of our pieces together. Richlite This unique and environmentally-conscious paper composite is used in some Loll pieces. Made with resin-saturated paper, Richlite requires no maintenance and may patina over time. Low-Impact Manufacturing Loll was conceived as a way to repurpose excess skate ramp material. Founded on principles of efficient and responsible use/reuse of manufacturing material, Loll products are fabricated using lean manufacturing techniques. Made in the USA Loll products are designed and manufactured in Duluth, Minnesota, USA.
  • Loll Designs Alfresco Table 82
    bobbyberkhome.com
    The Loll Alfresco Table is the perfect setting for any outdoor meal or social gathering. Constructed with a recycled HDPE frame and top, this Alfresco will clean up easily and requires no maintenance. This table is designed to be a companion with the 22 and 47 Alfresco Benches, Cricket and T77 Dining chairs, or an eclectic variety of each. Dimenssions: 82"W x 36"D x 30"H. 100% Recycled and Recyclable Our material is recycled and recyclable high-density polyethylene (HDPE), primarily from milk jugs. Approximately 8 milk jugs are reclaimed per pound. No Maintenance / Weatherproof Leave Loll products outside year-round! Loll never needs to be painted or stained and cleans easily with a soft brush, a natural cleaner or a power wash if you like that sort of thing. Replaceable Parts If for some reason a part on you furniture becomes damaged you can easily order just that part and replace it. Put the old part in your recycling bin or send it back to us and we will recycle it for you. Stainless Steel Fasteners High-quality stainless steel fasteners and brass inserts hold all of our pieces together. Richlite This unique and environmentally-conscious paper composite is used in some Loll pieces. Made with resin-saturated paper, Richlite requires no maintenance and may patina over time. Low-Impact Manufacturing Loll was conceived as a way to repurpose excess skate ramp material. Founded on principles of efficient and responsible use/reuse of manufacturing material, Loll products are fabricated using lean manufacturing techniques. Made in the USA Loll products are designed and manufactured in Duluth, Minnesota, USA.