Loll Designs Loll Deck Chair
Like it to get sale alerts
  • Fermob Alize Adjustable Stacking Deck Chair
    shophorne.com
    The Fermob Alize Collection by Pascal Mourgue has all the nobility, glamour and elegance of the transatlantic cruise liners. The sleek crisp curves of the aluminum frame combined with the light, colorful tear proof Outdoor Technical Fabric covering, or OTF, is a winning combination that is only exceeded by its extreme comfort. The Alize Deck Chair has an adjustable backrest with 2 positions and a removable footrest that can be stored beneath. The chair is made of partitioned aluminum and a sheet aluminum frame.. Fermob furniture undergoes several stages of rust proofing followed by two paint stages: a Fermob exclusive process in one of the most efficient plants in Europe. The paint is a DuPont powder, 100 percent polyester, anti UV, deposited electrostatically on the furniture for optimal coverage, then baked at 193 degrees, just like in the car industry. Ecological paint protects both the environment and your health: the powder paints used by Fermob contain no solvents. They are 100 percent recyclable and are recycled in a zero waste installation.
  • Fermob Plein Air Folding Side Chair - Set of 2
    shophorne.com
    Sold as a set of 2. The Plein Air Collection by Fermob represents an ideal in terms of simplicity, lightness and mobility, in line with new lifestyles. With comfort that comes from the mix of a tubular metal frame and an OTF seat, the functionality and practicality of folding furniture, the extreme stability of a U shaped base and, of course, its flowing, modern lines that create a feeling of freedom throughout the summer. Chairs are extra flat when folded away and the table folds easily while remaining stable on a variety of surfaces. Fermob furniture undergoes several stages of rust proofing followed by two paint stages: a Fermob exclusive process in one of the most efficient plants in Europe. The paint is a DuPont powder, 100 percent polyester, anti UV, deposited electrostatically on the furniture for optimal coverage, then baked at 193 degrees, just like in the car industry. Ecological paint protects both the environment and your health: the powder paints used by Fermob contain no solvents. They are 100 percent recyclable and are recycled in a zero waste installation.
  • Fermob Surprising Stacking Side Chair - Set of 2
    shophorne.com
    Sold in a set of 2. From the maker of the Origami bench and the Surprising Lounger, comes the Surprising Chair. This stackable chair is made of laser-cut sheet steel and a steel rod frame. Available in all Fermob colors with a 3 year guarantee. Fermob furniture undergoes several stages of rust proofing followed by two paint stages: a Fermob exclusive process in one of the most efficient plants in Europe. The paint is a DuPont powder, 100 percent polyester, anti UV, deposited electrostatically on the furniture for optimal coverage, then baked at 193 degrees, just like in the car industry. Ecological paint protects both the environment and your health: the powder paints used by Fermob contain no solvents. They are 100 percent recyclable and are recycled in a zero waste installation.
  • Fermob Bellevie Low Armchair - Indoor/Outdoor
    shophorne.com
    The Bellevie collection boasts geometric forms and soft curves that transcend styles and eras. Build and beautify your outdoor space with the Bellevie Collection. Very High Protection Treatment for outdoor use. Anti-UV powder coating. Cushions (off-white upholstery): Solution-dyed acrylic thread (pigments blended in the heart of the fiber for enhanced durability). Highly UV-resistant. Water-repellent and stain-resistant, mold-resistant. Breathable fabric: the fabric lets air through so that it breathes and prevents condensation. Soft fabric, comfortable and pleasant to the touch. Removable cushions, machine wash at 40°. Exclusive Fermob fabric (color and pattern).
  • Fermob Luxembourg Rocking Chair
    shophorne.com
    The Luxembourg collection by Fermob, initially produced for the Jardin du Luxembourg in Paris, has become something of a legend in its own right. Its style is an emblem of French design, an expression of French culture in furniture form. Rock and relax in one of the most exciting new Fermob pieces for 2013. The Luxembourg Rocking Chair will make a statement on any patio. This low rocker takes its inspiration from the Luxembourg Low Chair and adds a headrest portion for ultimate comfort. It pairs perfectly with the Luxembourg Small Low Table as a side table or a footrest when in stationary mode. Available in all the Fermob colors. 3 year guarantee. Fermob furniture undergoes several stages of rust proofing followed by two paint stages: a Fermob exclusive process in one of the most efficient plants in Europe. The paint is a DuPont powder, 100 percent polyester, anti UV, deposited electrostatically on the furniture for optimal coverage, then baked at 193 degrees, just like in the car industry. Ecological paint protects both the environment and your health: the powder paints used by Fermob contain no solvents. They are 100 percent recyclable and are recycled in a zero waste installation.
  • Fermob 1900 Stacking Side Chair - Set of 2
    shophorne.com
    Sold in a set of 2. 1900 is one of the oldest collections from Fermob, a romantic range, featuring the handiwork of a blacksmith. It tells the tales of the early 20th century gardens in the French countryside. Tabletops and seats made from perforated lacquered steel. Available in all Fermob colors. This romantic 1900 Side Chair is made of lacquered steel and has a very high protection cataphoresis finish making it excellent for outdoor use. The detailing on the chair is still hand forged by a blacksmith in France. Fermob furniture undergoes several stages of rust proofing followed by two paint stages: a Fermob exclusive process in one of the most efficient plants in Europe. The paint is a DuPont powder, 100 percent polyester, anti UV, deposited electrostatically on the furniture for optimal coverage, then baked at 193 degrees, just like in the car industry. Ecological paint protects both the environment and your health: the powder paints used by Fermob contain no solvents. They are 100 percent recyclable and are recycled in a zero waste installation.
  • Thos. Baker Rockport Teak Rocker
    thosbaker.com
    Reminiscent of plantation verandas or coastal porches, this rocker will be everyone's favorite summer seat. The rockport teak rocker is designed with traditional mortise and tenon joinery and doweled construction. Made from premium teak timber, fairly harvested from plantation grown trees over 40 years old.
  • Loll Designs Taavi Outdoor Chair - White
    shophorne.com
    All Loll Design products are made from 100% recycled high density polyethylene (plastic milk jugs). Since 2005, Loll Designs has kept over 18 million milk jugs out of landfills. In 2005, AIA award-winning, local Duluth architect David Salmela designed the office for Loll's design/manufacturing facility and the good ideas never stopped. Nearly 7 years later Loll introduce a unique collection of Finnish-inspired, sculptural furniture by David. Taavi is an inspired low profile lounge perfectly suited to outdoor contemplation. Both speak the same language. Available in 100% recycled high density polyethylene (#2 Plastic Bottles) in white. Height: 25.5" | Seat Height Front: 12.25" | Seat Height Back: 7.5" | Seat Depth: 17" | Overall Depth: 30" | Width 24"
  • Fermob 1900 Stacking Arm Chair - Set of 2
    shophorne.com
    Sold in a set of 2. 1900 is one of the oldest collections from Fermob, a romantic range, featuring the handiwork of a blacksmith. It tells the tales of the early 20th century gardens in the French countryside. Tabletops and seats made from perforated lacquered steel. Available in all Fermob colors. This romantic 1900 Arm Chair is made of lacquered steel and has a very high protection cataphoresis finish making it excellent for outdoor use. The detailing on the chair is still hand forged by a blacksmith in France. Fermob furniture undergoes several stages of rust proofing followed by two paint stages: a Fermob exclusive process in one of the most efficient plants in Europe. The paint is a DuPont powder, 100 percent polyester, anti UV, deposited electrostatically on the furniture for optimal coverage, then baked at 193 degrees, just like in the car industry. Ecological paint protects both the environment and your health: the powder paints used by Fermob contain no solvents. They are 100 percent recyclable and are recycled in a zero waste installation.
  • Thos. Baker Moderne Club Chair
    thosbaker.com
    Virtually an entire new category of outdoor furniture, moderne collection seating features premium, all-weather N-dura® wicker woven over reticulated (rapid water-shedding) foam. The foam is sandwiched between the wicker and a powder-coated aluminum subframe providing comfort and support without the expense or inconvenience of separate cushions. Arms, legs and tables are powder-coated aluminum in a mahogany finish almost indistinguishable from real mahogany. The styling cues are strictly mid-century modern. The materials and construction are state-of-the-art.
  • Loll Designs Gladys Outdoor Chair - White
    shophorne.com
    All Loll Design products are made from 100% recycled high density polyethylene (plastic milk jugs). Since 2005, Loll Designs has kept over 18 million milk jugs out of landfills. In 2005, AIA award-winning, local Duluth architect David Salmela designed the office for Loll's design/manufacturing facility and the good ideas never stopped. Nearly 7 years later Loll introduce a unique collection of Finnish-inspired, sculptural furniture by David. Gladys is a tall and narrower translation of its sister chair, Taavi, with a vertical headrest that is more comfortable than it may appear. Both speak the same language. Available in 100% recycled high density polyethylene (#2 Plastic Bottles) in white. Height: 43" | Seat Height Front: 14.5" | Seat Height Back: 10.25" | Seat Depth: 16.75" | Overall Depth: 31.25" | Width 20"
  • USA
    Styling idea
  • Frank Gehry Easy Chair
    dwr.com
    Frank Gehry’s love of architecture began at the age of 8 on the floor of his grandmother’s house while he was playing with different blocks of wood. He never lost his wondrous sense of play, which informs all his work and is instantly recognizable in his Gehry Outdoor Collection (2004). Best of Show winner at Neocon 2004, it’s a result of a collaboration with Heller, who asked him simply to “create furniture as unique and beautiful as his buildings.” This weatherproof collection is characterized by sculptural monolithic forms made of rotational-molded polyethylene in striking colors inspired by Gehry’s flower sculpture for French artist Sophie Calle. Each hollow single-piece form features consistent wall thickness and stress-free outer corners for supreme resistance to breakage. All are suitable for residential and commercial use indoors and out. Made in U.S.A.
  • Philippe Starck Broom Chair
    dwr.com
    People also liked
    “Imagine,” says Philippe Starck, “a guy who takes a humble broom and starts to clean the workshop, and with this dust he makes new magic.” The “dust” that Starck refers to is reclaimed polypropylene and wood fiber, two of theused to create his Broom Chair (2012). Starck drew the shape of this reclaimed, repurposed and recyclable chair in 2003, but it took a decade to design the chair in these eco-friendly. The Broom Chair made its debut at the 2012 Salone del Mobile in Milan, and as soon as we saw it, we knew it belonged in our assortment. Durable, comfortable, colorful and unique in how it makes use of normally discarded, Broom is a smart solution that literally sweeps up the waste from the industrial manufacturing cycle. All colors suitable for outdoor use except orange. This is the authentic Broom Chair by Emeco. Made in U.S.A. Made of a new composite of discarded industrial, reclaimed even before they enter the long cycle that most recycledhave to undergo. Listed as an Editors’ Product Pick by Interior Design magazine in October 2012. Broom is a patented design by Philippe Starck for Emeco. It is illegal for another company to clone this chair.
  • Loll Designs Go Club Rocker
    dwr.com
    People also liked
    The Go Collection (2005) was created after “an absolutely informal study taken by us lollygaggers,” say designers Greg Benson and Jeff Taly, the founders of Loll Designs. “We learned that people frequently sit with other people when outside. Perhaps this is because there’s no TV, or maybe our gregarious tendencies are amplified outdoors?” The Go Collection is a modern take on classic club chairs and love seats found indoors. Its seats are similar in height to those of dining chairs, and its backs have a less dramatic angle than those of typical outdoor lounge chairs for a more upright sitting position. These pieces are made of recycled plastic reclaimed from post-consumer goods like milk jugs, which can be recycled again if necessary. Since Loll was founded in 2006, its use of recycledhas kept millions of milk jugs out of landfills. The fade-resistant, waterproof, maintenance-free Go Collection is made to last for years. Each piece ships flat to save on packing; simple assembly required (Allen wrench included). Made in U.S.A.
  • Jasper Morrison Magis Air Side Chair, Set of 4
    dwr.com
    Jasper Morrison’s inventive approach toand form takes new shape in the construction of his Air Collection (2000). The celebrated designer achieves these sleek and strong pieces by injection-molding a combination of polypropylene and glass fiber. The process creates a material of extreme durability that is rigid enough to meet structural needs yet still flexible and with some give for user comfort. This UV-resistant collection is suitable for both indoor and outdoor use. Air Side Chair stacks up to 10 high for storage. Made in Italy.
  • Loll Designs Adirondack Rocker
    dwr.com
    People also liked
    “We make outdoor furniture for the modern lollygagger,” explains Loll founder Greg Benson. “Our furniture is for people who are looking for fresh design that’s made in the U.S.A. with sustainable manufacturing practices. At Loll, we strive to inspire people to appreciate the outdoors both by the way we make our products and how they are intended to be used.” Starting as a side project, Loll was founded in 2006 by a custom skate park manufacturer as a way to repurpose excess ramp material. That original company is gone, but Loll still designs and produces durable all-weather outdoor furniture made from 100% recycled and recyclable plastic, mostly from reclaimed post-consumer milk jugs. Since the company’s founding, its dedication to the environment has kept millions of milk jugs out of landfills. The Adirondack Collection (2008), Loll’s most renowned, is waterproof, fade-resistant and maintenance-free. Each piece ships flat to save on packing; simple assembly required (Allen wrench included). Made in U.S.A.
  • Loll Designs Deck Chair
    lumens.com
    People also liked
    "Designed for those who work hard at relaxing. The Loll Designs Deck Chair provides power loungers a comfortably contoured back, sloped seat, high, wide arms and a stainless steel bottle opener under the right arm. Made out of 100% recycled HDPE--mostly from recycled milk jugs--available in a wide range of fashionable colors."
  • Color Challenge
    Styling idea
  • Skagerak Steamer Deck Chair - Teak
    shophorne.com
    The maritime atmosphere of large cruise ships is beautifully conveyed to the Steamer Deck Chair and enhances summer pleasure and sunshine in the garden, on the patio or at the beach.
  • Loll Designs Go Club Chair
    dwr.com
    People also liked
    The Go Collection (2005) was created after “an absolutely informal study taken by us lollygaggers,” say designers Greg Benson and Jeff Taly, the founders of Loll Designs. “We learned that people frequently sit with other people when outside. Perhaps this is because there’s no TV, or maybe our gregarious tendencies are amplified outdoors?” The Go Collection is a modern take on classic club chairs and love seats found indoors. Its seats are similar in height to those of dining chairs, and its backs have a less dramatic angle than those of typical outdoor lounge chairs for a more upright sitting position. These pieces are made of recycled plastic reclaimed from post-consumer goods like milk jugs, which can be recycled again if necessary. Since Loll was founded in 2006, its use of recycledhas kept millions of milk jugs out of landfills. The fade-resistant, waterproof, maintenance-free Go Collection is made to last for years. Each piece ships flat to save on packing; simple assembly required (Allen wrench included). Made in U.S.A.
  • Loll Designs Rapson&Reg; Cave Chair
    yliving.com
    Design by Ralph Rapson.Made in the U.S.A. by Loll Designs. Ralph Rapson first sketched the Rapson® Cave Chair in 1943 in plywood with a cushion, but it was never produced. Perfectly over-sized and comfortable the Cave Chair will induce hours of conversation whether you?re sitting in it or just walking by. Taking its name from another mid-century Rapson design, the earth-excavated Cave House, which was also never built, adds history to its immediate appeal. Loll furniture is shipped flat pack to save on costs and resources. Product Features: 100% recycled material won't fade, warp or rot Constructed of 376 recycled milk jugs, with stainless steel fasteners and brass inserts Products are built to be UV resistant and weatherproof and may be left out year-round in any and all extreme conditions. Maintenance-free year round – simply hose off to clean Simple assembly with necessary tools and easy-to-follow instructions included 1% For The Planet is a growing global movement of 1,201 companies that donate 1% of their gross sales to a network of more than 3,382 environmental organizations worldwide
  • Jasper Morrison Magis Air Armchair, Set of 4
    dwr.com
    Jasper Morrison’s inventive approach toand form takes new shape in the construction of his Air Collection (2000). The celebrated designer achieves these sleek and strong pieces by injection-molding a combination of polypropylene and glass fiber. The process creates a material of extreme durability that is rigid enough to meet structural needs yet still flexible and with some give for user comfort. This UV-resistant collection is suitable for both indoor and outdoor use. Air Armchair stacks up to 10 high for storage. Made in Italy.
  • Pier 1 Imports Bistro Chair
    pier1.com
    People also liked
    Pier1 Bistro Chair - Navy - Aluminum - Outdoor. From Paris, with love. Our quintessentially French navy Bistro Chair boasts style and substance with a dash of ooh la la thrown in. The rustproof aluminum frame and hand-woven synthetic rattan help keep this outdoor seat looking chic no matter the weather, plus it’s stackable for easy storage and comes in a range of pretty colors.. Navy. 22"W x 24"D x 36"H. Aluminum, plastic. Hand-woven. Clean with a soft, dry cloth. For indoor/outdoor use. Cushion sold separately. Navy.
  • Loll Designs Rapson&Reg; Rocker, Low Back
    yliving.com
    Design by Ralph Rapson.Made in the U.S.A. by Loll Designs. Fueled by a chance meeting at an AIA event, Loll Designs and Rapson-Inc. have teamed up to create an outdoor version of Ralph Rapson's iconic rocker. Loll infuses the Rapson Rocker, Low Back with their expertise as a modern outdoor furniture manufacturer specializing in the use of recycled materials to make affordable, long lasting and no-maintenance outdoor furniture, made in a sustainable and responsible manner. Ralph Rapson sketched the first version of his "Rapson Rocker" in 1939 while studying and working at Cranbrook Academy of Art under Eliel Saarinen and Charles Eames. In 1940, he modified the design with solid wood and webbing for his entry in MoMA's Organic Design in Home Furnishings Competition. In the mid-1940s, Rapson completed a full line of solid wood and webbing furniture, in collaboration with H.G. Knoll. Faithful to Ralph Rapson's groundbreaking 1945 Rapson® Line for H.G. Knoll, the Rapson® Rocker, Low Back has a deeply curved seat and a relaxed seat angle. Product Features: 100% recycled material won't fade, warp or rot Constructed of 344 recycled milk jugs, with stainless steel fasteners and brass inserts Products are built to be UV resistant and weatherproof and may be left out year-round in any and all extreme conditions. Maintenance-free year round – simply hose off to clean Simple assembly with necessary tools and easy-to-follow instructions included 1% For The Planet is a growing global movement of 1,201 companies that donate 1% of their gross sales to a network of more than 3,382 environmental organizations worldwide
  • Innit Designs Concha Chair - White Base
    shophorne.com
    The Concha Chair is a contemporary dining or café chair, also cool as a guest chair in your living room or office and suitable for indoors and out. Composed of a metal base and seat hand woven with solid vinyl cord. Available with white, chrome, copper or standard black frame. The galvanized steel is rust resistant and the very durable yet flexible, UV protected vinyl will stay colorfast for years. It is comfortable without a cushion, weatherproof, breathable, easy to clean, and available in everybodys favorite color. A great, modern design for commercial and residential applications. Pretty good innit...
  • Set Of Two Paris Bistro Armchairs - Cappuccino
    frontgate.com
    Create the allure of a French sidewalk caf with our charming and comfortable Paris Bistro Dining Chairs. These colorful chairs derive their authentic look from strong bent rattan frame and a neatly handwoven, all-weather seat and back. Chair frame is handcrafted of natural bent rattan . Polystrand fiber weave withstands the effects of rain, snow, salt water and sun . Rattan frame will weather to a silvery patina over the course of a year; to preserve its original look, rub with linseed oil . Ideally suited for a balcony, deck or under an arbor . Complete the look with our classic Paris Bistro caf table . Imported.
  • Loll Designs Rapson&Reg; Rocker, High Back
    yliving.com
    Design by Ralph Rapson.Made in the U.S.A. by Loll Designs. Fueled by a chance meeting at an AIA event, Loll Designs and Rapson-Inc. have teamed up to create an outdoor version of Ralph Rapson's iconic rocker. Loll infuses the Rapson Rocker, High Back with their expertise as a modern outdoor furniture manufacturer specializing in the use of recycled materials to make affordable, long lasting and no-maintenance outdoor furniture, made in a sustainable and responsible manner. Ralph Rapson sketched the first version of his "Rapson Rocker" in 1939 while studying and working at Cranbrook Academy of Art under Eliel Saarinen and Charles Eames. In 1940, he modified the design with solid wood and webbing for his entry in MoMA's Organic Design in Home Furnishings Competition. In the mid-1940s, Rapson completed a full line of solid wood and webbing furniture, in collaboration with H.G. Knoll. Faithful to Ralph Rapson's groundbreaking 1945 Rapson® Line for H.G. Knoll, the Rapson® Rocker, High Back has a deeply curved seat and a relaxed seat angle. Product Features: 100% recycled material won't fade, warp or rot Constructed of 360 recycled milk jugs, with stainless steel fasteners and brass inserts Products are built to be UV resistant and weatherproof and may be left out year-round in any and all extreme conditions. Maintenance-free year round – simply hose off to clean Simple assembly with necessary tools and easy-to-follow instructions included 1% For The Planet is a growing global movement of 1,201 companies that donate 1% of their gross sales to a network of more than 3,382 environmental organizations worldwide

Get sale alerts on styles you love

Continue
×
About