Taylor Chair Modern Chair MidCentury Furniture Chairs Ottomans - Thrive
Like it to get in stock alerts
  • Zuzunaga Cuzco Pouf - Shape 2
    shophorne.com
    The Cuzco Collection by Zuzunaga is inspired by an ancient wall on the outskirts of Cuzco, Peru believed to be built by the Incas. The ancient Saksaywaman dry stone wall is built of gigantic stones that fit together so perfectly a single piece of paper cannot fit between them. Each of the 4 geometric shapes in the Cuzco Collection will fit together in only one way to create a specific pattern but individually can be formed into endless combinations of shapes and colors. The poufs are upholstered in wool using Divina fabric by Kvadrat. The primary colors are accented with a contrasting trim. Each of the 4 of the Cuzco Poufs play on the right angle lending them to be used in corners as a chair or table or in the center of the room in various combinations. Let your imagination soar in combining the shapes and colors to bring a sense of fun and adventure to any room. Each of the 4 shapes are available in red, blue, yellow and green.
  • Artek Pirkka Bench
    shophorne.com
    Ilimari Tapiovaara was committed to designing furniture for a much broader market. His goal was to produce quality inexpensive furniture that was made from materials that were readily available in Finland. The rustic simplicity and smaller structure made the Pirkka Collection very popular for use in the smaller homes in the post war era of the 1950s. The Pirkka Collection is made of solid wood with simple, clean lines which make for stylish functionality. The wood is joined together using no screws making it remarkably lightweight. The rustic table carries with it the aesthetic appeal of modern design even 50 years later. The table is available in a variety of lengths making it ideal for several different locations. The bench can be paired with the table or used as a stand lone piece. The wider than usual width makes it a comfortable seat. The side chair also pairs well with the table but can stand on its own and the stool completes the set and is available in 4 heights to make it even more versatile. The seats and table top are stained pine with a black lacquered solid birch frame.
  • Artek Pirkka Low Stool
    shophorne.com
    Ilimari Tapiovaara was committed to designing furniture for a much broader market. His goal was to produce quality inexpensive furniture that was made from materials that were readily available in Finland. The rustic simplicity and smaller structure made the Pirkka Collection very popular for use in the smaller homes in the post war era of the 1950s. The Pirkka Collection is made of solid wood with simple, clean lines which make for stylish functionality. The wood is joined together using no screws making it remarkably lightweight. The rustic table is carries with it the aesthetic appeal of modern design even 50 years later. The table is available in a variety of lengths making it ideal for several different locations. The bench can be paired with the table or used as a stand lone piece. The wider than usual width makes it a comfortable seat. The side chair also pairs well with the table but can stand on its own and the stool completes the set and is available in 4 heights to make it even more versatile. The seats and table top are stained pine with a black lacquered solid birch frame.
  • Modernica Case Study Bentwood Bed
    shophorne.com
    A benchmark for superior craftsmanship, The Case Study® Bed adheres to the highest standards of workmanship and genuine materials. Designed by Modernica Studios and built by Modernica’s master builders, this bed is the perfect definition of form follows function. The superstructure of the bed and the headboard are built with a solid one-and-a-half-inch thick laminated hardwood. And each bed is engineered and built with six, rather than the standard four-legs. These additional legs add a remarkable overall-strength and sturdiness to the bed, which makes for a peaceful nights sleep. The mattress sits directly on the platform which is built with two zinc-plated perforated steel inserts. These perforated inserts allow the mattress to breathe naturally ― thus eliminating the need for a standard conventional box spring. The Case Study Bed is engineered to provide a lifetime of outstanding durability, while maintaining a modern, elegant look for your home. The Case Study Bed is available in three finishes. Handcrafted in Los Angeles, CA. See Also: Lief Mattress.
  • Modernica Shell Side Chair - H-Base
    shophorne.com
    The Case Study Fiberglass H-Base Chair is a classic icon without any fuss. Pick your favorite shell for a visually solid chair that will not disappoint. Easily one of the most important and recognizable designs of the twentieth century. The Fiberglass Shell Chairs were originally designed in 1948, as an entry in The Museum of Modern Art’s International Design Competition. At the time, no one could possibly have anticipated the massive success and longevity of this iconoclastic design. In the early fifties, fiberglass was considered an ultra-high tech material. Produced with a mixture of resin and glass fibers, it was lightweight, yet heavy-duty. Initial development and production was through Zenith Plastics—early pioneers of developing fiberglass for household and military applications. As for the chair bases, they were cleverly designed to provide a number of leg options that would be interchangeable within and between the arm shell and the side shell. The shell chairs were first available in the spring of 1950. The first runs of the chairs were produced in only three colors; griege, elephant-hide gray, and parchment—all of which had interesting translucent qualities. The chairs were distributed until 1983. In 2000, Modernica revived this potentially lost art of high-pressure, molded fiberglass. Modernica creates each shell, by hand, one-by-one, in our Los Angeles factory—just as they had been designed, developed, and produced in Southern California in the 1950s. Modernica uses all of the original presses and specialized equipment obtained from Century Plastics. To ensure authenticity of production, the initial shell chair production was overseen by Sol Fingerhut and Irv Green, the same team employed over sixty years ago to develop the original technology. Modernica creates each chair with the charge of adhering to the original tactile qualities, texture, and characteristics that alone are unique to the fiberglass shell chair. Our historic equipment has created thousands of chairs for three generations of chair lovers — and everyday Modernica continues to produce beautiful chairs for upcoming generations. Choose from a wide range of shell colors and chair base options. Modernica offers the flexibility to build a chair to suit your individual style and needs. Please note that due to the nature of fiberglass, some "hairs" may vary in darkness and color due to the singeing/burning process used to create the seat. These fibers add to the uniqueness of each chair. Handcrafted in Los Angeles, U.S.A..
  • jewel
    Styling idea
  • Artek Pirkka Table
    shophorne.com
    Ilimari Tapiovaara was committed to designing furniture for a much broader market. His goal was to produce quality inexpensive furniture that was made from materials that were readily available in Finland. The rustic simplicity and smaller structure made the Pirkka Collection very popular for use in the smaller homes in the post war era of the 1950s. The Pirkka Collection is made of solid wood with simple, clean lines which make for stylish functionality. The wood is joined together using no screws making it remarkably lightweight. The rustic table carries with it the aesthetic appeal of modern design even 50 years later. The table is available in a variety of lengths making it ideal for several different locations. The bench can be paired with the table or used as a stand lone piece. The wider than usual width makes it a comfortable seat. The side chair also pairs well with the table but can stand on its own and the stool completes the set and is available in 4 heights to make it even more versatile. The seats and table top are stained pine with a black stained solid birch frame.
  • Modernica Shell Counter Side Chair - Dowel Swivel Base
    shophorne.com
    The Case Study Fiberglass Dowel Counter Stool with swivel base is an essential for the modern home. Available in a myriad of colors, choose your wire-frame in either zinc-plated steel or black powder-coated steel, and finish your design by choosing either solid maple dowels or solid walnut dowels. Easily one of the most important and recognizable designs of the twentieth century. The Fiberglass Shell Chairs were originally designed in 1948, as an entry in The Museum of Modern Art’s International Design Competition. At the time, no one could possibly have anticipated the massive success and longevity of this iconoclastic design. In the early fifties, fiberglass was considered an ultra-high tech material. Produced with a mixture of resin and glass fibers, it was lightweight, yet heavy-duty. Initial development and production was through Zenith Plastics—early pioneers of developing fiberglass for household and military applications. As for the chair bases, they were cleverly designed to provide a number of leg options that would be interchangeable within and between the arm shell and the side shell. The shell chairs were first available in the spring of 1950. The first runs of the chairs were produced in only three colors; griege, elephant-hide gray, and parchment—all of which had interesting translucent qualities. The chairs were distributed until 1983. In 2000, Modernica revived this potentially lost art of high-pressure, molded fiberglass. Modernica creates each shell, by hand, one-by-one, in our Los Angeles factory—just as they had been designed, developed, and produced in Southern California in the 1950s. Modernica uses all of the original presses and specialized equipment obtained from Century Plastics. To ensure authenticity of production, the initial shell chair production was overseen by Sol Fingerhut and Irv Green, the same team employed over sixty years ago to develop the original technology. Modernica creates each chair with the charge of adhering to the original tactile qualities, texture, and characteristics that alone are unique to the fiberglass shell chair. Our historic equipment has created thousands of chairs for three generations of chair lovers — and everyday Modernica continues to produce beautiful chairs for upcoming generations. Choose from a wide range of shell colors and chair base options. Modernica offers the flexibility to build a chair to suit your individual style and needs. Please note that due to the nature of fiberglass, some "hairs" may vary in darkness and color due to the singeing/burning process used to create the seat. These fibers add to the uniqueness of each chair. Handcrafted in Los Angeles, U.S.A.
  • Modernica Shell Counter Arm Chair - Dowel Swivel Base
    shophorne.com
    The Case Study Fiberglass Dowel Chair is an essential for the modern home and with so many options—it is possible to create your own one-of-a-kind chair. The shell is available in a myriad of colors. Choose your wire-frame in either zinc-plated steel or black powder-coated steel, and finish your design by choosing either solid maple dowels or solid walnut dowels. Easily one of the most important and recognizable designs of the twentieth century. The Fiberglass Shell Chairs were originally designed in 1948, as an entry in The Museum of Modern Art’s International Design Competition. At the time, no one could possibly have anticipated the massive success and longevity of this iconoclastic design. In the early fifties, fiberglass was considered an ultra-high tech material. Produced with a mixture of resin and glass fibers, it was lightweight, yet heavy-duty. Initial development and production was through Zenith Plastics—early pioneers of developing fiberglass for household and military applications. As for the chair bases, they were cleverly designed to provide a number of leg options that would be interchangeable within and between the arm shell and the side shell. The shell chairs were first available in the spring of 1950. The first runs of the chairs were produced in only three colors; griege, elephant-hide gray, and parchment—all of which had interesting translucent qualities. The chairs were distributed until 1983. In 2000, Modernica revived this potentially lost art of high-pressure, molded fiberglass. Modernica creates each shell, by hand, one-by-one, in our Los Angeles factory—just as they had been designed, developed, and produced in Southern California in the 1950s. Modernica uses all of the original presses and specialized equipment obtained from Century Plastics. To ensure authenticity of production, the initial shell chair production was overseen by Sol Fingerhut and Irv Green, the same team employed over sixty years ago to develop the original technology. Modernica creates each chair with the charge of adhering to the original tactile qualities, texture, and characteristics that alone are unique to the fiberglass shell chair. Our historic equipment has created thousands of chairs for three generations of chair lovers — and everyday Modernica continues to produce beautiful chairs for upcoming generations. Choose from a wide range of shell colors and chair base options. Modernica offers the flexibility to build a chair to suit your individual style and needs. Please note that due to the nature of fiberglass, some "hairs" may vary in darkness and color due to the singeing/burning process used to create the seat. These fibers add to the uniqueness of each chair. Handcrafted in Los Angeles, U.S.A.
  • Innit Designs Innit Classic Chair - White Base
    shophorne.com
    This is the signature Innit Designs chair. Though similar in construction, and form to the Acapulco chair, this chair remains entirely unique with a completely circular frame rather than the pear or avocado shape of the Acapulco Chair. The originality, style and comfort of the Innit Chair cannot be overstated. Galvanized steel powder coated base. Suitable for both indoor and outdoor use. Other colors available.
  • Modernica Shell Side Chair - Dowel Base
    shophorne.com
    The Case Study Fiberglass Dowel Chair is an essential for the modern home and with so many options—it is possible to create your own one-of-a-kind chair. The shell is available in a myriad of colors. Choose your wire-frame in either zinc-plated steel or black powder-coated steel, and finish your design by choosing either solid maple dowels or solid walnut dowels. Easily one of the most important and recognizable designs of the twentieth century. The Fiberglass Shell Chairs were originally designed in 1948, as an entry in The Museum of Modern Art’s International Design Competition. At the time, no one could possibly have anticipated the massive success and longevity of this iconoclastic design. In the early fifties, fiberglass was considered an ultra-high tech material. Produced with a mixture of resin and glass fibers, it was lightweight, yet heavy-duty. Initial development and production was through Zenith Plastics—early pioneers of developing fiberglass for household and military applications. As for the chair bases, they were cleverly designed to provide a number of leg options that would be interchangeable within and between the arm shell and the side shell. The shell chairs were first available in the spring of 1950. The first runs of the chairs were produced in only three colors; griege, elephant-hide gray, and parchment—all of which had interesting translucent qualities. The chairs were distributed until 1983. In 2000, Modernica revived this potentially lost art of high-pressure, molded fiberglass. Modernica creates each shell, by hand, one-by-one, in our Los Angeles factory—just as they had been designed, developed, and produced in Southern California in the 1950s. Modernica uses all of the original presses and specialized equipment obtained from Century Plastics. To ensure authenticity of production, the initial shell chair production was overseen by Sol Fingerhut and Irv Green, the same team employed over sixty years ago to develop the original technology. Modernica creates each chair with the charge of adhering to the original tactile qualities, texture, and characteristics that alone are unique to the fiberglass shell chair. Our historic equipment has created thousands of chairs for three generations of chair lovers — and everyday Modernica continues to produce beautiful chairs for upcoming generations. Choose from a wide range of shell colors and chair base options. Modernica offers the flexibility to build a chair to suit your individual style and needs. Please note that due to the nature of fiberglass, some "hairs" may vary in darkness and color due to the singeing/burning process used to create the seat. These fibers add to the uniqueness of each chair. Handcrafted in Los Angeles, U.S.A.
  • Artek Pirkka Bar Stool
    shophorne.com
    Ilimari Tapiovaara was committed to designing furniture for a much broader market. His goal was to produce quality inexpensive furniture that was made from materials that were readily available in Finland. The rustic simplicity and smaller structure made the Pirkka Collection very popular for use in the smaller homes in the post war era of the 1950s. The Pirkka Collection is made of solid wood with simple, clean lines which make for stylish functionality. The wood is joined together using no screws making it remarkably lightweight. The rustic table carries with it the aesthetic appeal of modern design even 50 years later. The table is available in a variety of lengths making it ideal for several different locations. The bench can be paired with the table or used as a stand lone piece. The wider than usual width makes it a comfortable seat. The side chair also pairs well with the table but can stand on its own and the stool completes the set and is available in 4 heights to make it even more versatile. The seats and table top are stained pine with a black lacquered solid birch frame.
  • Modernica Shell Arm Chair - Rolling Base
    shophorne.com
    The Case Study Fiberglass Rolling Chair is the classic office chair of choice. Modernica updated the vintage 4-star aluminum rolling base, with a contract-approved five-star base. The new five-star base surpasses the original design with an added weight-adjustable, tilt-control feature, which locks your chosen position in place. Also added is a fun to use, gas-lift height adjustment lever, for superfast height adjustments. The height is adjustable up to six-inches and the chair is easily tilted forward or back. The base rotates smoothly 360-degrees. Suitable for any corporate or home office space, this base has a five-year normal-wear guarantee. Easily one of the most important and recognizable designs of the twentieth century. The Fiberglass Shell Chairs were originally designed in 1948, as an entry in The Museum of Modern Art’s International Design Competition. At the time, no one could possibly have anticipated the massive success and longevity of this iconoclastic design. In the early fifties, fiberglass was considered an ultra-high tech material. Produced with a mixture of resin and glass fibers, it was lightweight, yet heavy-duty. Initial development and production was through Zenith Plastics—early pioneers of developing fiberglass for household and military applications. As for the chair bases, they were cleverly designed to provide a number of leg options that would be interchangeable within and between the arm shell and the side shell. The shell chairs were first available in the spring of 1950. The first runs of the chairs were produced in only three colors; griege, elephant-hide gray, and parchment—all of which had interesting translucent qualities. The chairs were distributed until 1983. In 2000, Modernica revived this potentially lost art of high-pressure, molded fiberglass. Modernica creates each shell, by hand, one-by-one, in our Los Angeles factory—just as they had been designed, developed, and produced in Southern California in the 1950s. Modernica uses all of the original presses and specialized equipment obtained from Century Plastics. To ensure authenticity of production, the initial shell chair production was overseen by Sol Fingerhut and Irv Green, the same team employed over sixty years ago to develop the original technology. Modernica creates each chair with the charge of adhering to the original tactile qualities, texture, and characteristics that alone are unique to the fiberglass shell chair. Our historic equipment has created thousands of chairs for three generations of chair lovers — and everyday Modernica continues to produce beautiful chairs for upcoming generations. Choose from a wide range of shell colors and chair base options. Modernica offers the flexibility to build a chair to suit your individual style and needs. Please note that due to the nature of fiberglass, some "hairs" may vary in darkness and color due to the singeing/burning process used to create the seat. These fibers add to the uniqueness of each chair. Handcrafted in Los Angeles, U.S.A.
  • Modernica Shell Side Chair - Prince Charles Base
    shophorne.com
    In 2009, Peter Shire and the Modernica Studio teamed up and designed the Prince Charles Base. By combining the modern and the classic, the chair has been described as a distant cousin of Queen Anne. “Shire’s interpretation on the modern classic incorporates 300-years of furniture design into a single chair. By giving the signature shell chair a set of violin-like legs, Shire’s adds a touch of the Victorian era to the seat.” Easily one of the most important and recognizable designs of the twentieth century. The Fiberglass Shell Chairs were originally designed in 1948, as an entry in The Museum of Modern Art’s International Design Competition. At the time, no one could possibly have anticipated the massive success and longevity of this iconoclastic design. In the early fifties, fiberglass was considered an ultra-high tech material. Produced with a mixture of resin and glass fibers, it was lightweight, yet heavy-duty. Initial development and production was through Zenith Plastics—early pioneers of developing fiberglass for household and military applications. As for the chair bases, they were cleverly designed to provide a number of leg options that would be interchangeable within and between the arm shell and the side shell. The shell chairs were first available in the spring of 1950. The first runs of the chairs were produced in only three colors; griege, elephant-hide gray, and parchment—all of which had interesting translucent qualities. The chairs were distributed until 1983. In 2000, Modernica revived this potentially lost art of high-pressure, molded fiberglass. Modernica creates each shell, by hand, one-by-one, in our Los Angeles factory—just as they had been designed, developed, and produced in Southern California in the 1950s. Modernica uses all of the original presses and specialized equipment obtained from Century Plastics. To ensure authenticity of production, the initial shell chair production was overseen by Sol Fingerhut and Irv Green, the same team employed over sixty years ago to develop the original technology. Modernica creates each chair with the charge of adhering to the original tactile qualities, texture, and characteristics that alone are unique to the fiberglass shell chair. Our historic equipment has created thousands of chairs for three generations of chair lovers — and everyday Modernica continues to produce beautiful chairs for upcoming generations. Choose from a wide range of shell colors and chair base options. Modernica offers the flexibility to build a chair to suit your individual style and needs. Please note that due to the nature of fiberglass, some "hairs" may vary in darkness and color due to the singeing/burning process used to create the seat. These fibers add to the uniqueness of each chair. Handcrafted in Los Angeles, U.S.A.
  • Modernica Side Bar Stool - Dowel Swivel Base
    shophorne.com
    The Case Study Fiberglass Dowel Barstool with swivel base is an essential for the modern home. Available in a myriad of colors, choose your wire-frame in either zinc-plated steel or black powder-coated steel, and finish your design by choosing either solid maple dowels or solid walnut dowels. Easily one of the most important and recognizable designs of the twentieth century. The Fiberglass Shell Chairs were originally designed in 1948, as an entry in The Museum of Modern Art’s International Design Competition. At the time, no one could possibly have anticipated the massive success and longevity of this iconoclastic design. In the early fifties, fiberglass was considered an ultra-high tech material. Produced with a mixture of resin and glass fibers, it was lightweight, yet heavy-duty. Initial development and production was through Zenith Plastics—early pioneers of developing fiberglass for household and military applications. As for the chair bases, they were cleverly designed to provide a number of leg options that would be interchangeable within and between the arm shell and the side shell. The shell chairs were first available in the spring of 1950. The first runs of the chairs were produced in only three colors; griege, elephant-hide gray, and parchment—all of which had interesting translucent qualities. The chairs were distributed until 1983. In 2000, Modernica revived this potentially lost art of high-pressure, molded fiberglass. Modernica creates each shell, by hand, one-by-one, in our Los Angeles factory—just as they had been designed, developed, and produced in Southern California in the 1950s. Modernica uses all of the original presses and specialized equipment obtained from Century Plastics. To ensure authenticity of production, the initial shell chair production was overseen by Sol Fingerhut and Irv Green, the same team employed over sixty years ago to develop the original technology. Modernica creates each chair with the charge of adhering to the original tactile qualities, texture, and characteristics that alone are unique to the fiberglass shell chair. Our historic equipment has created thousands of chairs for three generations of chair lovers — and everyday Modernica continues to produce beautiful chairs for upcoming generations. Choose from a wide range of shell colors and chair base options. Modernica offers the flexibility to build a chair to suit your individual style and needs. Please note that due to the nature of fiberglass, some "hairs" may vary in darkness and color due to the singeing/burning process used to create the seat. These fibers add to the uniqueness of each chair. Handcrafted in Los Angeles, U.S.A.
  • Modernica Arm Shell Chair - Dowel Base
    shophorne.com
    The Case Study Fiberglass Dowel Chair is an essential for the modern home and with so many options—it is possible to create your own one-of-a-kind chair. The shell is available in a myriad of colors. Choose your wire-frame in either zinc-plated steel or black powder-coated steel, and finish your design by choosing either solid maple dowels or solid walnut dowels. Easily one of the most important and recognizable designs of the twentieth century. The Fiberglass Shell Chairs were originally designed in 1948, as an entry in The Museum of Modern Art’s International Design Competition. At the time, no one could possibly have anticipated the massive success and longevity of this iconoclastic design. In the early fifties, fiberglass was considered an ultra-high tech material. Produced with a mixture of resin and glass fibers, it was lightweight, yet heavy-duty. Initial development and production was through Zenith Plastics—early pioneers of developing fiberglass for household and military applications. As for the chair bases, they were cleverly designed to provide a number of leg options that would be interchangeable within and between the arm shell and the side shell. The shell chairs were first available in the spring of 1950. The first runs of the chairs were produced in only three colors; griege, elephant-hide gray, and parchment—all of which had interesting translucent qualities. The chairs were distributed until 1983. In 2000, Modernica revived this potentially lost art of high-pressure, molded fiberglass. Modernica creates each shell, by hand, one-by-one, in our Los Angeles factory—just as they had been designed, developed, and produced in Southern California in the 1950s. Modernica uses all of the original presses and specialized equipment obtained from Century Plastics. To ensure authenticity of production, the initial shell chair production was overseen by Sol Fingerhut and Irv Green, the same team employed over sixty years ago to develop the original technology. Modernica creates each chair with the charge of adhering to the original tactile qualities, texture, and characteristics that alone are unique to the fiberglass shell chair. Our historic equipment has created thousands of chairs for three generations of chair lovers — and everyday Modernica continues to produce beautiful chairs for upcoming generations. Choose from a wide range of shell colors and chair base options. Modernica offers the flexibility to build a chair to suit your individual style and needs. Please note that due to the nature of fiberglass, some "hairs" may vary in darkness and color due to the singeing/burning process used to create the seat. These fibers add to the uniqueness of each chair. Handcrafted in Los Angeles, U.S.A.
  • Modernica Shell Arm Chair - Prince Charles Base
    shophorne.com
    In 2009, Peter Shire and the Modernica Studio teamed up and designed the Prince Charles Base. By combining the modern and the classic, the chair has been described as a distant cousin of Queen Anne. “Shire’s interpretation on the modern classic incorporates 300-years of furniture design into a single chair. By giving the signature shell chair a set of violin-like legs, Shire’s adds a touch of the Victorian era to the seat.” Easily one of the most important and recognizable designs of the twentieth century. The Fiberglass Shell Chairs were originally designed in 1948, as an entry in The Museum of Modern Art’s International Design Competition. At the time, no one could possibly have anticipated the massive success and longevity of this iconoclastic design. In the early fifties, fiberglass was considered an ultra-high tech material. Produced with a mixture of resin and glass fibers, it was lightweight, yet heavy-duty. Initial development and production was through Zenith Plastics—early pioneers of developing fiberglass for household and military applications. As for the chair bases, they were cleverly designed to provide a number of leg options that would be interchangeable within and between the arm shell and the side shell. The shell chairs were first available in the spring of 1950. The first runs of the chairs were produced in only three colors; griege, elephant-hide gray, and parchment—all of which had interesting translucent qualities. The chairs were distributed until 1983. In 2000, Modernica revived this potentially lost art of high-pressure, molded fiberglass. Modernica creates each shell, by hand, one-by-one, in our Los Angeles factory—just as they had been designed, developed, and produced in Southern California in the 1950s. Modernica uses all of the original presses and specialized equipment obtained from Century Plastics. To ensure authenticity of production, the initial shell chair production was overseen by Sol Fingerhut and Irv Green, the same team employed over sixty years ago to develop the original technology. Modernica creates each chair with the charge of adhering to the original tactile qualities, texture, and characteristics that alone are unique to the fiberglass shell chair. Our historic equipment has created thousands of chairs for three generations of chair lovers — and everyday Modernica continues to produce beautiful chairs for upcoming generations. Choose from a wide range of shell colors and chair base options. Modernica offers the flexibility to build a chair to suit your individual style and needs. Please note that due to the nature of fiberglass, some "hairs" may vary in darkness and color due to the singeing/burning process used to create the seat. These fibers add to the uniqueness of each chair. Handcrafted in Los Angeles, U.S.A.
  • Modernica Shell Side Chair Rocker
    shophorne.com
    The Case Study Fiberglass Rocking Chair is an essential for the modern home and with so many options, it is possible to create your own one-of-a-kind chair. The shell is available in a myriad of colors. Choose your wire-frame in either zinc-plated steel or black powder-coated steel, and finish your design by choosing either solid maple runners or solid walnut runners. Easily one of the most important and recognizable designs of the twentieth century. The Fiberglass Shell Chairs were originally designed in 1948, as an entry in The Museum of Modern Art’s International Design Competition. At the time, no one could possibly have anticipated the massive success and longevity of this iconoclastic design. In the early fifties, fiberglass was considered an ultra-high tech material. Produced with a mixture of resin and glass fibers, it was lightweight, yet heavy-duty. Initial development and production was through Zenith Plastics—early pioneers of developing fiberglass for household and military applications. As for the chair bases, they were cleverly designed to provide a number of leg options that would be interchangeable within and between the arm shell and the side shell. The shell chairs were first available in the spring of 1950. The first runs of the chairs were produced in only three colors; griege, elephant-hide gray, and parchment—all of which had interesting translucent qualities. The chairs were distributed until 1983. In 2000, Modernica revived this potentially lost art of high-pressure, molded fiberglass. Modernica creates each shell, by hand, one-by-one, in our Los Angeles factory—just as they had been designed, developed, and produced in Southern California in the 1950s. Modernica uses all of the original presses and specialized equipment obtained from Century Plastics. To ensure authenticity of production, the initial shell chair production was overseen by Sol Fingerhut and Irv Green, the same team employed over sixty years ago to develop the original technology. Modernica creates each chair with the charge of adhering to the original tactile qualities, texture, and characteristics that alone are unique to the fiberglass shell chair. Our historic equipment has created thousands of chairs for three generations of chair lovers — and everyday Modernica continues to produce beautiful chairs for upcoming generations. Choose from a wide range of shell colors and chair base options. Modernica offers the flexibility to build a chair to suit your individual style and needs. Please note that due to the nature of fiberglass, some "hairs" may vary in darkness and color due to the singeing/burning process used to create the seat. These fibers add to the uniqueness of each chair. Handcrafted in Los Angeles, U.S.A.
  • Loll Designs Pliny The Lounger
    shophorne.com
    Inspired by the ubiquitous motel chair from the 1940s, Pliny the Lounger is a timely update on this classic. Designed and manufactured by Loll Designs with Sielaff Corporation using sustainable materials, a stainless steel frame is married to the Loll recycled and recyclable high density polyethylene. Pliny features an elegantly mandrel bent 1 inch tubular stainless steel frame with poly seat and back. The welded tube frame has no open ends and is a one piece construction that will last a lifetime. The Pliny has that classic bouncy feel that brings one back to a moment in their familiar past, but clearly the chair is rooted in the present. The Pliny is the recipient of a Good Design Award as awarded by The Chicago Athenaeum: Museum of Architecture and Design.
  • Normann Copenhagen Onkel 2-Seater Sofa
    shophorne.com
    Onkel (the Danish word for Uncle) is a sofa that combines the simplicity of modern forms with the soft curves of the olden days. The outer shell of the sofa has a firm expression, while the cushions are comfortable and inviting. The choice of materials adds a sensuous side with its characteristically Nordic connotations. The Onkel sofa consists of a simple, upholstered frame with cushions. The inspiration for the cushions derives from the more bombastic upholstered sofas typical of the pre-1950s era. To emphasize the merger of two completely different worlds of expression, the back cushion has been elegantly encapsulated by the frame. The materials in Onkel create a dynamic effect with its plain-colored frame, mottled back and cushion and color-lacquered under frame. All in the same color shade. This is what makes Onkel stand as a complete unit. Simon Legald explains: “As a designer, I am curious about how the materials work together with the idea. Onkel is a sofa that was derived of a dialog between craftsmanship and industry. In creating Onkel, I have revived old craftsmanship techniques and used them in a new context. In doing this, the details add character to Onkel.” Onkel is a recognizable Scandinavian design and is available in three colors both as a two or three-seater sofa upholstered with fabrics from Gabriel.
  • Innit Designs Adam Ottoman/Table - Black Frame
    shophorne.com
    The Adam Ottoman is a contemporary rectangular ottoman or side table suitable for indoors and out. Composed of a metal base woven with vinyl cord. Coordinates well with our many vinyl cord chairs. The galvanized steel is rust resistant and the very durable yet flexible, UV protected vinyl will stay colorfast for years. This table is weatherproof, easy to clean, and available in everybodys favorite color. The Adam Ottoman is a great, modern design for commercial and residential applications. Pretty good innit (Add a tempered glass top for a more solid table surface - glass not included).
  • Dream Room
    Styling idea
  • Normann Copenhagen Knot Chair
    shophorne.com
    The Japanese designer Tatsuo Kuroda has created a chair for Normann Copenhagen which unites classic materials with modern aesthetics. The Knot chair has a clean and simple expression that leads the thoughts to classic 1950s furniture. The overall impression is determined by the details, such as the dominant jointing points in natural paper cord, which also provide optimal sitting comfort. Tatsuo Kuroda is a graduate of Tama Art University in Japan and has worked with product and furniture design since 2006. The structural components of the Knot chair are tied together with paper cord, which provide both support and a stylish visual expression; and, despite his Japanese background, Tatsuo has been inspired by traditional Scandinavian design. Tatsuo Kuroda explains: “My thoughts behind Knot was to create a chair which is a reinterpretation of itself - a chair that is both classic and modern at the same time. I am inspired by Danish design classics in which function and aesthetics come together." The Knot chair has all of the characteristics we expect of a chair, but with a modern Scandinavian look characterized by workmanship working hand in hand with good sitting features. The result is comfort for both body and eye.
  • Design House Stockholm Bjork Pouf/Stool
    shophorne.com
    The Bjork series and its patterned structure offer a modern and enriched textile quality that is beautifully paired with stylish leather detailing. The designer, Lena Bergstrom's, conviction is that the flat textile surface of a rug is just as natural in the home as stone and wood: "The [pouf] is a natural part of the Björk collection, just like the stumps in a birch forest. They are a piece of furniture that is light and soft in its expression." For the Bjork pouf, Lena has drawn inspiration from the rough black and white graphical structure of the birch tree's trunk. The color tones of Bjork create a marbled effect through a warp of cotton intertwined with a weft in wool, known not only for its softness, but also for its in-built resistance to dirt.
  • Modernica Shell 25" Side Counter Stool - H-Base
    shophorne.com
    The Case Study Fiberglass 25” Counter Stool is a simple and clean look. Pick your favorite shell for a visually solid chair that will look great in any kitchen. Easily one of the most important and recognizable designs of the twentieth century. The Fiberglass Shell Chairs were originally designed in 1948, as an entry in The Museum of Modern Art’s International Design Competition. At the time, no one could possibly have anticipated the massive success and longevity of this iconoclastic design. In the early fifties, fiberglass was considered an ultra-high tech material. Produced with a mixture of resin and glass fibers, it was lightweight, yet heavy-duty. Initial development and production was through Zenith Plastics—early pioneers of developing fiberglass for household and military applications. As for the chair bases, they were cleverly designed to provide a number of leg options that would be interchangeable within and between the arm shell and the side shell. The shell chairs were first available in the spring of 1950. The first runs of the chairs were produced in only three colors; griege, elephant-hide gray, and parchment—all of which had interesting translucent qualities. The chairs were distributed until 1983. In 2000, Modernica revived this potentially lost art of high-pressure, molded fiberglass. Modernica creates each shell, by hand, one-by-one, in our Los Angeles factory—just as they had been designed, developed, and produced in Southern California in the 1950s. Modernica uses all of the original presses and specialized equipment obtained from Century Plastics. To ensure authenticity of production, the initial shell chair production was overseen by Sol Fingerhut and Irv Green, the same team employed over sixty years ago to develop the original technology. Modernica creates each chair with the charge of adhering to the original tactile qualities, texture, and characteristics that alone are unique to the fiberglass shell chair. Our historic equipment has created thousands of chairs for three generations of chair lovers — and everyday Modernica continues to produce beautiful chairs for upcoming generations. Choose from a wide range of shell colors and chair base options. Modernica offers the flexibility to build a chair to suit your individual style and needs. Please note that due to the nature of fiberglass, some "hairs" may vary in darkness and color due to the singeing/burning process used to create the seat. These fibers add to the uniqueness of each chair. Handcrafted in Los Angeles, U.S.A.
  • Normann Copenhagen Era Lounge Chair - Low
    shophorne.com
    Classic, inviting, nostalgic and curved. That's one way of describing the new range of lounge chairs designed by the Danish designer, Simon Legald. But the Era collection is many other things too. The design is well-proportioned, the lines are sharp, and the feel is contemporary. Era combines modern production techniques with traditional furniture craftsmanship in a timeless and characterful design. With its streamlined design and high quality, Era is a durable, long-lasting and versatile collection that easily accommodates modern interior’s need for flexibility. The chair is suitable for many different rooms in the home and can easily be used for different purposes as needs change. The Era collection is designed to transcend generations and is just as at home with lovers of design or families with children, as it is with young couples or their grandparents. The Era Lounge Chair is available in both a high and low version. The legs are available in oak, walnut, black lacquered steel or chrome, as well a chrome frame for the rocking chair. A footstool is also available for the Era collection, allowing ample opportunity for comfortable relaxation and rest for the feet. Choose between two lovely wool textiles with a vivid feel and beautiful structures, or soft, durable leather in a vast number of colors. Simon Legald says: ”It took a while to get the proportions and the interaction between the soft curves and straight lines on the shells just right. It was crucial that the upholstering and stitching were carried out with the utmost precision. I wanted to create individual chairs where each one had its own character. I did this through the variations of the high and low versions, and by the different frames available for the chair. For example, the wooden frames are flat and add warmth while the slimmer, round steel and chrome frames give a more industrial feel. Finally, the frame for the rocking chair is a slightly unexpected and playful choice for a lounge chair.” Priced with Gabriel Breeze Fusion upholstery-other materials available.
  • Modernica Shell 30" Side Bar Stool - H-Base
    shophorne.com
    The Case Study Fiberglass 30” Barstool is a simple and clean look. Pick your favorite shell for a visually solid chair that will look great in any situation. Easily one of the most important and recognizable designs of the twentieth century. The Fiberglass Shell Chairs were originally designed in 1948, as an entry in The Museum of Modern Art’s International Design Competition. At the time, no one could possibly have anticipated the massive success and longevity of this iconoclastic design. In the early fifties, fiberglass was considered an ultra-high tech material. Produced with a mixture of resin and glass fibers, it was lightweight, yet heavy-duty. Initial development and production was through Zenith Plastics—early pioneers of developing fiberglass for household and military applications. As for the chair bases, they were cleverly designed to provide a number of leg options that would be interchangeable within and between the arm shell and the side shell. The shell chairs were first available in the spring of 1950. The first runs of the chairs were produced in only three colors; griege, elephant-hide gray, and parchment—all of which had interesting translucent qualities. The chairs were distributed until 1983. In 2000, Modernica revived this potentially lost art of high-pressure, molded fiberglass. Modernica creates each shell, by hand, one-by-one, in our Los Angeles factory—just as they had been designed, developed, and produced in Southern California in the 1950s. Modernica uses all of the original presses and specialized equipment obtained from Century Plastics. To ensure authenticity of production, the initial shell chair production was overseen by Sol Fingerhut and Irv Green, the same team employed over sixty years ago to develop the original technology. Modernica creates each chair with the charge of adhering to the original tactile qualities, texture, and characteristics that alone are unique to the fiberglass shell chair. Our historic equipment has created thousands of chairs for three generations of chair lovers — and everyday Modernica continues to produce beautiful chairs for upcoming generations. Choose from a wide range of shell colors and chair base options. Modernica offers the flexibility to build a chair to suit your individual style and needs. Please note that due to the nature of fiberglass, some "hairs" may vary in darkness and color due to the singeing/burning process used to create the seat. These fibers add to the uniqueness of each chair. Handcrafted in Los Angeles, U.S.A..
  • Philippe Starck Emeco Stool Seat Pad - Vinyl
    dwr.com
    After updating the iconic 1006 seat by Emeco for the Hudson Hotel in New York City, Philippe Starck took on the Emeco Counter and Barstools, stripping the classics of their back and arms and giving them an irresistably slender profile. Simple, elegant and commodious for bodies of all sizes, the stools contain up to 80% recycled aluminum and are handcrafted to be stronger than steel using the same proprietary 77-step process as the classic 1006 Navy Collection. First designed as prototypes for the Mies van der Rohe retrospective at the Museum of Modern Art in 2001, the Bar and Counter Stools are solutions that the museum thought Mies van der Rohe himself might choose today. Made available to the public in 2002 and equipped with optional vinyl seat pads, they have a cool neutrality right for any environment, artfully blending contemporary crispness with the contours of '50s modernism. The optional Seat Pad, in black, is made of vinyl and is easily cleaned with a damp cloth.
  • Untitled #485
    By andi
    Styling idea

Get sale alerts on styles you love

Continue
×
About